E30 Zone

about to order my clutch for my conversion.

fitted the m20 flywheel. and using a e36 is box. so whats going to be the best clutch for it?

any one help....

was going to ordfer a 325 e30 kit...will this work ok?

if your using the m20 flywheel you will need the starter motor to match

also my highest recommendation is to get a sachs m20 clutch.. i fitted an luk item to my m52 and its shite!!!!

needless to say the engine will be coming out over winter and a sachs one put in its place. when i did my first 24v conversion it was an m50 and i re-used the sachs clutch from my m20 (second hand) with no such drama but i bought an luk item being tight and its my only regret.... period!

cheers dude...did u you use a complete 325 kit or get the release bearing from a 323?

no need for 323 release bearing mate!

i used m20 325 item and its all fine.

if you are using e36 box you need to use e36 clutch slave afaik

cheers dude

thank you for your help