E30 Zone

Posted: **Wed Feb 17, 2010 8:48 pm**

If I used a M50 engine in an E36 328i, what missions am I looking at when it comes down to wiring harness and ECU etc.

The E36 has got a good gearbox and clutch but the engine is blown so I am planning to use a M50 I have kicking about.

Any help would be great.

Posted: **Fri Feb 19, 2010 8:13 pm**

you will need engine harness and ecu too match.my bro has chipped ecu if u need one.goodluck

Posted: **Sat Feb 20, 2010 1:38 am**

Your going the wrong way!!!

S50 is the only way forward from a blown M52

E30 Zone

M52 to M50 swap - ECU Difference

M52 to M50 swap - ECU Difference

ecu

Re: ecu