no spark on m52 into e30

Moderator: martauto

Post Reply
User avatar
jonnyboy
E30 Zone Regular
E30 Zone Regular
Posts: 393
Joined: Mon Aug 21, 2006 11:00 pm

Sun Oct 26, 2014 6:12 pm

Hi. I've just put a m52 in my e30 . I've done the wiring my self and I've sill got the ews it turns over but got no spark at all. Am gessing its down t the ews but all looks fine.
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28641
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs
Contact:

Sun Oct 26, 2014 6:30 pm

99% an EWS problem
User avatar
jonnyboy
E30 Zone Regular
E30 Zone Regular
Posts: 393
Joined: Mon Aug 21, 2006 11:00 pm

Sun Oct 26, 2014 6:41 pm

Would that just stop the spark or the fuel aswel it turns over and there fuel.
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28641
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs
Contact:

Sun Oct 26, 2014 7:06 pm

The EWS will cut the injectors too
User avatar
jonnyboy
E30 Zone Regular
E30 Zone Regular
Posts: 393
Joined: Mon Aug 21, 2006 11:00 pm

Sun Oct 26, 2014 7:11 pm

Ye ur right my plugs are dry so gotta be the ews then . Best go back over my wires again.
User avatar
jonnyboy
E30 Zone Regular
E30 Zone Regular
Posts: 393
Joined: Mon Aug 21, 2006 11:00 pm

Sun Oct 26, 2014 8:19 pm

Might have to pay you to remove the ews from it.
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28641
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs
Contact:

Sun Oct 26, 2014 9:05 pm

No problem, makes a simpler conversion at least
Post Reply