E30 Zone

Looking at getting some new one's but on bmwfans it say's that they are NLA

http://bmwfans.info/parts/catalog/E28/S ... _flywheel/

Are the E34 one's the same or what else can I use?


Also, is it best to use a M30 clutch slave? ECP one good enough to do the job?

http://www.eurocarparts.com/ecp/c/BMW_5 ... 6d197&CSCY


TIA

http://www.realoem.com/bmw/partxref.do? ... +1+717+840


They seem to be the same as alot of models

All NLA.

Order them from bminiparts they have 51 of them.

http://www.bmminiparts.co.uk/PartDetail ... 517BCE7F07

Nice one, thanks for the link, i'll get them ordered

Any ideas on the clutch slave cylinder?

I just reused mine, with a good dab of threadlock. Have always done this when rebuilding engines, most people usually do that I know of

Bristol_Jer wrote:I just reused mine, with a good dab of threadlock. Have always done this when rebuilding engines, most people usually do that I know of

Me too

Even Yoda agrees... if its good enough for Dan its good enough for me.


http://www.e30zone.net/modules.php?name ... ight=bolts

I'll just be flash and buy some new one's as they not that expensive

Bump for second question

Im using the M20 one with no issue's.

So am I, but me thinks my Master is on it's way out

Saves me a few quid then

The Master on mine looks pretty new, not a big job to change I would of though anyway.

i changed my master cylinder when i had them clutch problems took the best part of 15mins to do..not a hard job at all!

Also every mechanic i knows re-uses the flywheel bolts, after a good wire-wheeling then a healthy dab of loctite n bobs your uncle and patsy's your auntie

When I looked on the parts list on BMWfans, it gave the M30 slave cylinder as being the same as an e30 318iS, but not as an M20 one?

Maybe they are all interchangeable

Have you fitted an M30 one?

Not yet Imy, I was planning to though, it's on my ever growing shopping list!

Ah okay, my shopping list is huge and expensive this month

ImysE30 wrote:Ah okay, my shopping list is huge and expensive this month

I know the feeling mate!

Bristol_Jer wrote:

ImysE30 wrote:Ah okay, my shopping list is huge and expensive this month

I know the feeling mate!

But I keep saying to myself, it'll all be worth it

What are the torque settings for these bolts?