E30 Zone

Hello there

Thank you for everyones helpf with my M30 conversion. I now have the engine running connecting the six wires as shown previously. Here is my first drive with only the manifolds on (exhaust time Friday):



I am having a problem with regards the wires left as my loom has been cut. Here is a list of the wire colour codes if anyone could shed a light on this I would be greatful.

White/black
White/black
Green
Blue
Black/white
Green/yellow
Green/white
White/green
Grey
Black
Green/Black

Also the car was a 1990 320i SE

Any help would be much appreciated!

Regards Steven

I'm sure it is in the Wiki somewhere.
I can't remeber off the top of my head.

I did have a look through the Wiki but didn't have any luck finding anything to help me

Im close to useless with electrics so wont be much help

What havent you got working, does it drive as it should?

I only have the 6 wires on the C101 plug connected. They are the wires to make it run.

So I don't have a speedo or anything like that at the moment.

i found this slighty helpful when trying to sort my wiring:

http://www.e30zone.net/modules.php?name ... c&t=158933

stolen from the m50/52 boys.

Thank you everyone! Yet again you all have helped me greatly. All the wiring is now complete