building an Eta engine
Posted: Tue Oct 20, 2015 8:18 pm
Hello, some time ago, i made some topics about identifying the engine. I've found out that the stroke is 81mm, so i've got an Eta block
I got the head 885, and the intake 325 is ported, im going to buy a new camshaft set standard one, and i will buy need bearings for the block too.
the ECU i got Bosch Motronic M1.3 0 261 200 173
also i got all the wirings.
Is there anything i should know about building this engine? something special? or is it just to put it all together and get going?
My E30 from 1988 is born with a m20b20.
My English isnt the best, sorry for that..
I got the head 885, and the intake 325 is ported, im going to buy a new camshaft set standard one, and i will buy need bearings for the block too.
the ECU i got Bosch Motronic M1.3 0 261 200 173
also i got all the wirings.
Is there anything i should know about building this engine? something special? or is it just to put it all together and get going?
My E30 from 1988 is born with a m20b20.
My English isnt the best, sorry for that..