E30 Zone

Anyone know of anybody in the UK who does this :

http://store.nexternal.com/shared/Store ... =764396309

I've googled the web a fair bit but so far haven't found any performance/bhp/torque figures though. Web site is sound and these guys have good props everywhere I've read about them.

Ps. If this is in the wrong place can a mod advise/move please.

Thx
Johnscales

John - I asked a 'same topic' question yesterday - 'A-tech' builds stroker engines just off the M25- was this a supply only request for the parts.

http://www.fastbimmer.co.uk/projects/projectm20b27.html

Yep it was. I got the impression that IE only did the service onsite. Emailed them to confirm but no reply.
Does A-tech do a 3.1L engine build? I'm really interested in bhp/tourqe that this conversion gives.

I know somebody in Germany that can supply the parts for a 3.1.

Ant really knows his stuff so if you have the funds it would be money well spent if you got him to do the whole lot.

sorry sorted link^^^^^

Cheers. Just given Ant a call and left a message.

Ireland, VAC and metric mechanic all sell kits, and all the parts can be bought in the uk/europe

check this

http://www.e30zone.net/e30zonewiki/inde ... roker_Info

and this

http://www.e30zone.net/e30zonewiki/inde ... ding_a_2.8

Dave_M3 wrote:I know somebody in Germany that can supply the parts for a 3.1.

Can you elaborate or provide more info via PM please? The best option seems to be using the pistons from Metric Mechanic - while not exactly cheap at $1200/set they allow use of 135mm rods from BMW and MM has a good rep. Would be interested in knowing about other options though.

John, no message on the machine dude, drop me a call tomoz or maybe an Email

3.1 is not a bolt in affair, block prep required + all the usual suspects, the parts are the tip of the Iceberg

Email sent Ant.
Thanks for the reply

Mail sent !

I have covered a few bases there, feel free to come back with more