E30 Zone

Are these available seperately does anyonw know and if so where can I buy some ?

Gaz's website does not tell me if they are available seperately

PM'd Tom

Uploaded with ImageShack.us

These are what I have but I believe there is a piece missing Dave ? I wish I'd realised when I bought them...

Roller bearing and retaining clip Tom?

TBH I'm unsure, I can only get 2 holes to line up on the strut tower, not all 3 as per this photo -



Uploaded with ImageShack.us

I saw these below mounts in the RPM section and it made me realise why they dont fit as there is a piece missing, I think !

http://www.e30zone.net/modules.php?name ... c&t=146963

Cant remember the zoner I bought them from to ask him if he still has the bits im missing

I had these before I fitted the RPM topmounts.

The aluminium eccentric part fits at the inside of the turret top, and you have to elongate 2 of the 3 mounting holes to get them to fit.

You dont need the original rubber topmount (which you may have just shown to illustrate)

HTH.
Ste.

tomson wrote:TBH I'm unsure, I can only get 2 holes to line up on the strut tower, not all 3 as per this photo -



Uploaded with ImageShack.us

I saw these below mounts in the RPM section and it made me realise why they dont fit as there is a piece missing, I think !

http://www.e30zone.net/modules.php?name ... c&t=146963

Cant remember the zoner I bought them from to ask him if he still has the bits im missing

Hi Tom

Ours are a completely different design to the ones you have.

Yours are a one piece mount that rotates to give you adjustment, unfortunately you can adjust camber and castor independantly and the adjustment is limited.

I can supply spares for your mounts though if you do need anything.

Or better still upgrade to ours ;)

Jimmy

Yeah.. buy some off Jimmy and flog your others

Thanks for the advise guys.

Am I actually missing anything from my current topmount ? I cant believe a company like Gaz makes the mounts like this and expect you to elongate the turrent holes ??

im using the ones pictured on my gaz coilovers,i had to drill another holeout aswell because only 2 bolts lined up.

worked well with my setup.