Page 1 of 1

325i exhaust bracket..

Posted: Thu Dec 06, 2007 1:03 pm
by Jhonno
As title.. the one for the rear silencer

also with the m30 service kits, is it the same kit if the enginne is still in a 735i? I guess only the fuel filter and air filter might differ..

Re: 325i exhaust bracket..

Posted: Thu Dec 06, 2007 3:19 pm
by Jhonno
ooo also..

nuts for the waterpump housing to head studs.. s50b30

Re: 325i exhaust bracket..

Posted: Thu Dec 06, 2007 3:22 pm
by Jhonno
07129908191 part number of one of the studs.. need nuts for both.. M7

Re: 325i exhaust bracket..

Posted: Thu Dec 06, 2007 4:03 pm
by zimmerbimmer1
Jhonno wrote:As title.. the one for the rear silencer

also with the m30 service kits, is it the same kit if the enginne is still in a 735i? I guess only the fuel filter and air filter might differ..
Exhaust Bracket £25.76

m30 service kit is same for e32 and e34

Re: 325i exhaust bracket..

Posted: Thu Dec 06, 2007 4:08 pm
by zimmerbimmer1
Jhonno wrote:ooo also..

nuts for the waterpump housing to head studs.. s50b30
water pump is held on by bolts :?

Re: 325i exhaust bracket..

Posted: Thu Dec 06, 2007 4:09 pm
by zimmerbimmer1
Jhonno wrote:07129908191 part number of one of the studs.. need nuts for both.. M7
07129908191 £0.15 each
07129902630 £0.18 each

Re: 325i exhaust bracket..

Posted: Thu Dec 06, 2007 4:30 pm
by Jhonno
zimmerbimmer1 wrote:
Jhonno wrote:ooo also..

nuts for the waterpump housing to head studs.. s50b30
water pump is held on by bolts :?
not where its attached to the head.. it has 2 studs into the head and 2 nuts to screw it on

there are 3 bolts holding the housing to the block at the front by the stat tho yeah

Re: 325i exhaust bracket..

Posted: Thu Dec 06, 2007 5:13 pm
by zimmerbimmer1
to confirm the studs hold item no 4 on this link

http://www.realoem.com/bmw/showparts.do ... g=11&fg=15

this is the water pump

http://www.realoem.com/bmw/showparts.do ... g=11&fg=35

thinkin about it haven't you got a S50 B32????

Re: 325i exhaust bracket..

Posted: Thu Dec 06, 2007 5:44 pm
by Jhonno
ahh i thought it was the housing..

but yeah, studs hold no4 in that 1st link.. ive mis placed the nuts.. used tb ones on it (m7 still)

its a s50b30 with a b32 head, just to make things complicated ha, same casting tho

Re: 325i exhaust bracket..

Posted: Fri Dec 07, 2007 10:17 am
by zimmerbimmer1
pm sent