E30 Zone

Hi, i'd like to replace all the old faulty wiring(and plug/etc) to my speed sensor but i carn't tell which plug or terminals i need ?

These bits on there own probobly arn't worth putting an order in with you but i need some other bits so i should be able to get a worth while order together if you can help ?

The car is a 325 touring.

Cheers

Andy

Hi There,

Could you possibly let me know the 7 digit number on the connector itself you may need a magnifying glass
or very good eyes.

I can't remember the number or how the connector looks

Cool, i'll have a look on sunday and get back to you

[edit]My bad, it was just dirty contacts in the plug not the wiring, used lots of carb cleaner to see if i could get a part number from the plug and it's working fine now.

So please ignore my request for the diff speed sensor plug and crimp terminals, sorry. [/edit]

__________________________________________________________

Sorry it's taken so long to get back to you, the number on the plug hasn't got enough numbers in it and doesn't show on my ETK ?

1 378 416

I hope the pictures help ?

No worries I now Know the part number 1378417.

Cheers

Hi, just to let you know incase you try to send some more of these plug casings out the one i got was the wrong one. Instead of the rounded off corners being on diagonally opposed corners like in the pic above they were both at either the top or the bottom. The electrical terminals that came with the plug casing fit the plug OK and look like they are the right shape but i havn't tried them in the speed sensor yet.

This isn't ment to be a dig, i hope it helps point you in the right direction to finding the right plug casing in the future and if you do find it can i have one !

The plug came with the order relating to this thread below....

http://www.e30zone.net/modules.php?name ... ic&t=85123

Thanks for the info