E30 Zone

Can you please tell me the price for m52 2.8 main and big end bearings ? My engine is a 1996 thanks jim

these bearings are colour coded

you will need to have them removed before i can quote

Brett

Hi Bret how do you tell the shell colour I have bought a 30l m54 carnk rod and pistons and don't have main cap shells just rod shells? The crank has red dots and rod shells are red std size will I have to measure the crank? Thanks jim

Jim

I think the only way to be sure would be to get it measured and we can go from there

Brett

Hi Brett had my crank measured and I need red std red shells rod and main. Can you please give me a price please thanks jim

Jim

I cant work this out, are you saying you are trying to use M52 2.8 and M54 3.0?

I have been looking most of the day yesterday and cant find red coded mains for this type of engine

all I can do is quote you for a set of standard bearings but I cant guarantee they will be right without knowing what vehicle the engine is from

is this ok?

Hi Brett my engine is a 2.8 m52 and I am fitting crank rod and pistons from a m54 3.0 if you you can quote on standard main and conrod bearings for m54 3.0 that would be great

Jim

Mains £200.99
Big ends £136.15

like I have said before we cannot guarantee anything if its not standard fitment, you could have a look at realoem.com and see if you can work out part numbers you require

Prices inc. E30Zone Discount and VAT delivered to mainland UK
Please call our Parts Dept. on 01242 257999 and quote 14628

There is a P&P cost of £1.99 on all orders under £20

Please remember if you require an urgent response drop our
Parts Department an email

partscheltenham@cotswoldgroup.com


Thanks

Brett