E30 Zone

Please help!
I have recently replaced the centre and rear box on the above car but was unable to anchor the exhaust at the centre of the car as the mounting bracket has disintegrated.
I have been to various parts suppliers to source this bracket but with no joy.
It's mounted to the automatic gearbox with 2 fixings mounted about 70 - 75mm apart.
Any ideas, part number's or photo's you could share would be appreciated!

Thanks for reading!

Hi There

Can i get vehicle details

Thanks

Brett

Hi Brett

Thanks for the reply.
It's a 91' 325i Touring vin no:WBAAG62010EA60534

Cheers
Steve

Hi Steve

i have had a look and its a bit unclear which item you need, if you have a look at www.realoem.com you will be able to look at the same pictures we use to identify parts it also gives you part numbers, hope this helps

Brett

Hi Brett

Thanks for the link.
The parts I'm after start from parts. 9 to 22 on the page describing the non CAT exhaust system, basically the whole bracket assembly just before the midsection of the exhaust.
Is this possible?

The first part 9: 18211178300 - part 22: 07119912501

Thanks for the information, I look forward to hearing from you!

Steve.

Hi Steve

all of the items required

£26.58

Prices inc. VAT delivered to mainland UK
Please call our Parts Dept. on 01242 257999 and quote 44913

There is a P&P cost of £1.99 on all orders under £20

Thanks

Brett

Brett

Thanks for all your help finding these parts, order placed Friday!
Will be in touch in the near future.
Thanks

Steve

No probs. Thanks.