E30 Zone

Manifolds can now be ordered for

Any engine in any car for any turbo and any wastegate layout.
Here are a couple of E36 RHD manifolds we made.








Here is an example for Andeeps E30 with M50 and Borg Warner split pulse turbo and 60mm wastegate.






Prices start at 950pounds.
Also available are downpipes, exhaust systems, intercooler pipes and so on.

You will need to bring your car as these are all bespoke for each scenario.

Pmd

I am currently taking Gunni/GSTuning to court over this manifold that he made for me. Full of holes and warped flanges. He was given the manifold twice to correct it, both time came back to me still full of holes and still with warped flanges.

There are also multiple damages done to my car which I am claiming back through court.

I would not advise anyone to use Gunni/GSTuning until this problem is sorted.

Full details will be posted soon, and I am going to publicize this across all forums that Gunni/GSTuning operates over.

He has also done the same thing to a friend of mine that had a manifold made by him.

I was gonna take my car there for a exhaust set up( turbo back) and a IC set up. But due to delays I have stalled it
I'll be watching with intrest!

Did Gunni do it or Damien at dI racing?

Speaking to Gunni last month regarding the above work and also wiring and tuning my VEMS. He said the only thing he gets involed in, is wiring the VEMS and tuning, he deosnt get involed in conversion work, as he has work commitments with cosworth . He uses Damien garage to carry out that work. For the exhaust and IC setup he recommended me to use Damien.

I think at one time they were partners when Gunni was undertaking conversion work. But now I think he passes on conversion work to Damien and only gets involed in tuning and wiring

I was suppose to drop my car last week but due to delays it hasn't been!

I hope you resolve your issues