E30 Zone

I've been looking at this again, and if there is interest I can supply two compatible (but no TUV) replacements for the Alpina 296x25 disc which is amazingly expensive for the genuine parts!

Option 1: Straight-swap one piece discs, roughly £200+vat/pr (T.B.C.)

Option 2: Straight-swap two piece bells+rotors, roughly £350+vat/pr (T.B.C.)

This thread is mainly to get some feelers out to guage interest and see if it's worth doing. I suspect it'll need to be done in batches due to low volume, but we'll see! If the Alpina guys could put the feelers out there I'd really appreciate it....?

(May also replace the Hartge H35's "295mm" ones as well, T.B.C.)

come one i'm not the only one! topless where are you?

I feel totally underwhelmed!

I may be interested in a set of the one piece disks - just need to check the condition of those on the car at the moment.

I'm interested in mounts for E34 540 4 pot brembo calipers to go onto a set of 296mm disks - is this something you can supply ?

No, it wouldn't be worth doing that kind of bracket as the 298.5mm WMS kit is a more effective solution to be honest.

I'll take that back, they are off a 1997 735i apparently.