Page 1 of 1
e36 m44 lumpy idle
Posted: Sun Oct 05, 2008 5:15 pm
by town325i
this problem has just started and it happens when the car is cold and at running temp ive ordered new inlet gaskets as they are only pence so im going to change them first
Re: e36 m44 lumpy idle
Posted: Mon Oct 06, 2008 9:06 am
by Jeepster
Common for the boot between the maf and the inlet to crack, worth a check.
Re: e36 m44 lumpy idle
Posted: Mon Oct 06, 2008 10:49 am
by town325i
ive replaced this as matter of cause allready when i changed the crank sensor
Re: e36 m44 lumpy idle
Posted: Mon Oct 06, 2008 10:53 am
by Jeepster
You haven't just changed the plugs or anything have you? ICV is always worth a check too.
Re: e36 m44 lumpy idle
Posted: Mon Oct 06, 2008 10:55 am
by town325i
i serviced it in january with genuine parts because they were cheaper than pattern parts. where is the icv hidden on these and can you take them apart to clean them out?
Re: e36 m44 lumpy idle
Posted: Mon Oct 06, 2008 3:43 pm
by town325i
found the problem broken oil breather pipe by the bulkhead
Re: e36 m44 lumpy idle
Posted: Mon Oct 06, 2008 5:02 pm
by Jeepster
AHH good work.
Re: e36 m44 lumpy idle
Posted: Tue Oct 07, 2008 12:10 am
by town325i
now all ive got to do is get a water pump pully and fit that after i broke it trying to get the viscus fan off that some coont had lock tighted on