central locking fault

Discuss Non-E30 BMW's in here - No selling!

Moderator: martauto

Post Reply
mat_wye
E30 Zone Newbie
E30 Zone Newbie
Posts: 3
Joined: Fri Jan 25, 2008 11:00 pm
Location: bognor regis

Sat Jan 26, 2008 5:12 pm

Firstly hello everyone (im new here)

secondly im sorry if im posting in the wrong section...


i have an intermittant fault on my central locking, its fine during the summer, then as soon as the cold / damp weather comes it starts again...

its an E46 328i sport (V reg), its mainly my wifes car and its a pig getting our child in and out just using the windows... we have another child on the way so i need to get this problem sorted, sell it and get something bigger.


like i said, its an intermittant fault, but its more often it wont work.


ive had the drivers door apart today and had the lock / handle assembly apart but there is nothing obvious...


when i press the lock button it locks every time but when i press the un-lock button you can hear the fuel flap unlock but nothing else happens... the boot unlocks & opens fine too.




any help would be fine
licking windows since 1980
E30Mark
E30 Zone Team Member
E30 Zone Team Member
Posts: 8107
Joined: Sun Jan 09, 2005 11:00 pm
Location: Wimborne, Dorset

Sat Jan 26, 2008 5:28 pm

Welcome! but posted in wrong section... I'll move it to 'other BMW chat'
1 & 2 bed flats in Bournemouth areas, with parking
PM for details
march109
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6632
Joined: Sun Aug 20, 2006 11:00 pm
Location: Bournemouth
Contact:

Sat Jan 26, 2008 5:31 pm

If it moves and it shouldn't Duct tape

If it doesn't and it should WD40.

Try it on the lock mechanism and then operate the lock a few times to move it about. Should work if its moisture getting into the mechansm.
325i Tech 1 Touring, breaking.

2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
mat_wye
E30 Zone Newbie
E30 Zone Newbie
Posts: 3
Joined: Fri Jan 25, 2008 11:00 pm
Location: bognor regis

Sat Jan 26, 2008 7:05 pm

i did that when i had all the drivers door assembly out today, i filled the whole mechanism with GT85 and then drained it before i re.fitted it
licking windows since 1980
Post Reply