Page 1 of 1

best product for detailing black plastic trim

Posted: Wed Feb 13, 2008 9:43 pm
by oakey
As above, what is the best product for the black plastic trim.

Mainly the grill as I have one brand new grill on the nearside and a old faded one on the offside :D

Re: best product for detailing black plastic trim

Posted: Wed Feb 13, 2008 9:47 pm
by 1an
at the moment im using auto glym bumper care, which seems to last for ages which is nice,

used it on my dads car today well only did the black plastics.

Image

its only about 7.99 a bottle,

but a product i have heard very very good reviews about is black wow, about £17 a bottle, Dave has experience of this product.

Re: best product for detailing black plastic trim

Posted: Wed Feb 13, 2008 9:55 pm
by dom-1984-320i
Meguiar's trim detailer is pretty good. I use it on all my black plastics and rubbers, great for the black window pillars too. you can build up a couple of coats and it lasts for a while. Not a bad price too

http://www.theultimatefinish.co.uk/Stor ... ductId=257

Re: best product for detailing black plastic trim

Posted: Wed Feb 13, 2008 10:08 pm
by e30topless
I have used autoglym bumper care for years it works great even on windscreen rubber seals boot trim ect

Posted: Wed Feb 13, 2008 10:13 pm
by johnl320
Smooth peanut butter, wipe it on wipe it off. Smells good to :D

Go on try it, Its not a wind up

john

Re:

Posted: Wed Feb 13, 2008 10:18 pm
by e30topless
thats a new one to me but worth a try ?

Re: best product for detailing black plastic trim

Posted: Wed Feb 13, 2008 11:51 pm
by grantfk10
dom-1984-320i wrote:Meguiar's trim detailer is pretty good. I use it on all my black plastics and rubbers, great for the black window pillars too. you can build up a couple of coats and it lasts for a while. Not a bad price too

I just started using this as I managed to pick up a bottle in Halfrauds for £3 8O

Works well on interior plastics too.

Re: best product for detailing black plastic trim

Posted: Thu Feb 14, 2008 11:56 pm
by pilt
On my plastic bits and rubber bits I have used black shoe polish!

Works suprisingly well! winkeye and gets your shoes shiny

Re: best product for detailing black plastic trim

Posted: Sat Feb 16, 2008 5:00 pm
by Cotty
grantfk10 wrote:
dom-1984-320i wrote:Meguiar's trim detailer is pretty good. I use it on all my black plastics and rubbers, great for the black window pillars too. you can build up a couple of coats and it lasts for a while. Not a bad price too

I just started using this as I managed to pick up a bottle in Halfrauds for £3 8O

Works well on interior plastics too.
I use this too. :thumb:

Re: best product for detailing black plastic trim

Posted: Sat Feb 16, 2008 5:04 pm
by d6dph
The Megs trim detailer is a great product.

I have bought a bottle (1 us gal) of Megs all seasons dressing which is great if a little pricey.

Posted: Sat Feb 16, 2008 5:12 pm
by StuBeeDoo
WD40. :thumb: Why buy something else when every good DIY-er already has at least one can in the garage. winkeye

Re:

Posted: Sat Feb 16, 2008 5:27 pm
by BB-BMW-325i
Try Baby oil winkeye
I use it on everything brings it up a nise shine :mad:
Tyre side walls, trim, paint, interiour trim.
Dont use it on your steering wheel. :mad:

Re:

Posted: Sat Feb 16, 2008 5:57 pm
by BreadBin
Vegetable oil works well too

Posted: Sat Feb 16, 2008 6:12 pm
by StuBeeDoo
johnl320 wrote:Smooth peanut butter, wipe it on wipe it off. Smells good to :D
Go on try it, Its not a wind up
I've heard a few good ones in my time John, but that's a first. I'll give it a try next time I clean the Touring.

Re:

Posted: Sat Feb 16, 2008 6:14 pm
by maxfield
Heat gun.

Re:

Posted: Sat Feb 16, 2008 6:16 pm
by johnl320
maxfield wrote:Heat gun.
Good call Max but better used on greying vauxhall corsa trim than higher quality BMW parts.

john

Re:

Posted: Sat Feb 16, 2008 6:21 pm
by maxfield
Pffft, who cares :)

I certainly won't be entering my car for any prizes. If it brings it back to life for a while then it's all good, well in my eyes, I must just be tight. :)

Re:

Posted: Sat Feb 16, 2008 7:28 pm
by Cotty
maxfield wrote:Heat gun.
If you do go that route dont get the part too hot or it will melt and bubble

Re:

Posted: Mon Feb 25, 2008 1:57 pm
by godstar
ive also heard smooth peanut butter is good,think i saw it on wrecks to riches on discovery

Re:

Posted: Tue Feb 26, 2008 1:44 am
by jaistanley
I used the heat gun method on my old MK2 golf.. None of the black plastic treatments ever worked, the heat gun brought them back to like new. The secret was to get the surface to JUST below it's melting temp.

Jai

Re:

Posted: Tue Feb 26, 2008 1:52 am
by grantfk10
jaistanley wrote: The secret was to get the surface to JUST below it's melting temp.
Jai

Yeah, just before it goes to that "oops, I've gone too far stage!"

Re:

Posted: Tue Feb 26, 2008 1:59 pm
by jaistanley
Like a hot fart?

Re:

Posted: Tue Feb 26, 2008 2:22 pm
by d6dph
Best way to use a heat gun is to warm the panel, then apply the trim dressing. Reheat the panel and leave to cool. Then wipe off the excess dressing.

This way the pores of the plastic open up and absorb the dressing then seal it in when it cools.

Re:

Posted: Sun Mar 16, 2008 2:25 pm
by capri_rob
jaistanley wrote:Like a hot fart?
lmao ! :D

Re:

Posted: Sun Mar 16, 2008 2:51 pm
by mikekean
http://www.demon-tweeks.co.uk/products/ ... KES1105/05

cartec TP-49 vinyl is great was amazed how good it was when i used it. put it on my sport 3 weeks ago and its been pissing down with rain and the trims are still black when it dries up.