Page 1 of 1
Windscreen Trim??
Posted: Mon Oct 10, 2005 7:16 pm
by crazybitchfttf
The plastic trim that sits in the rubber???
Anyone know who/where stock it??
Posted: Sat Oct 15, 2005 11:05 am
by smithy318i
You can buy it from the dealer.
Or you can buy it off a zoner who is breaking an E30... (ME)
You have PM.
Posted: Sat Oct 15, 2005 12:06 pm
by HartgeH27
I got mine done when the windsrcreen was replaced ..........no extra charge !! They stock it at most windscreen places, ask nicely !!!!
trim
Posted: Sun Jan 01, 2006 11:21 pm
by scottybeemer
imposible to fit without the correct tool,you can buy one ,but i just made one,only took ten mins to make,and it worked great
Posted: Sun Jan 01, 2006 11:34 pm
by smithy318i
imposible to fit without the correct tool
what does the tool look like, as i just used a screwdriver when i did mine.
Posted: Mon Jan 02, 2006 12:02 am
by Steve318i
I fitted a new rear one on my car, didn't have a fitting tool and just about managed it with a blunt screwdriver some lube and an old filler spreader. I did my one on a cold day and cracked the chrome inside a bit on the corners. I guess you need to put the trim in a bucket of hot water or do it on a hot day to stop this happening.
tool
Posted: Mon Jan 02, 2006 11:04 am
by scottybeemer
it's a small diamond shaped piece ov wire with a handle,i just used a welding rod bent to shape and a old file handle and some washing up liquid ,there's to much risk ov a screwdriver sliping and scraching the paint work(and it only took about 20 mins to do)