Masking tape left residue on bodywork
Moderator: martauto
Ladies and gentleman I sprayed a part of my van the other night and it's come out sound but I left the masking tape on over night.It rained so the residue from the tape is left on the bodywork after taking the masking tape off. Whats the best way to take this residue off the bodywork without damaging the bodywork?
Cheers Sean.
Cheers Sean.
-
jamie325isport
- E30 Zone Regular

- Posts: 689
- Joined: Sun Jan 16, 2005 11:00 pm
- Location: W.Sussex
-
march109
- Engaged to the E30 Zone

- Posts: 6632
- Joined: Sun Aug 20, 2006 11:00 pm
- Location: Bournemouth
- Contact:
damp cloth andelbow grease will remove it.
325i Tech 1 Touring, breaking.
2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
Be careful with that stuffBMshed wrote:or lynx bodyspray does the tricklol
ok so its all i had lol
After watching the Youtube video of the dent removal with the compressed air and heat gun me and a mate thought we'd try it on his girlfriends mini. Except all we could find was lynx deodorant. The car was a turd so we used it anyway.
Almost immediately it dissolved the paintwork
So although I dont doubt it worked for you BMshed I feel that I should state DO NOT SPRAY LYNX ONTO CAR PAINTWORK.

-
Elecblondie
- E30 Zone Regular

- Posts: 782
- Joined: Wed Jul 09, 2008 11:00 pm
- Location: Southampton
Just used white spirit successfully to do it.



