Page 1 of 1

My DIY all reds - in the process

Posted: Sun Mar 02, 2008 1:40 pm
by tha_lick
had a got at D'ingIM and im pretty impressed with myself!

their not fineshed yet, i was thinking about giving the whole lot a coat of smoked spray to bring back the shine but dull them out a bit because i think their a bit too bright for my car? its a lagoon green touring. . .

what do you guys think?

Image

Image

Re: My DIY all reds - in the process

Posted: Sun Mar 02, 2008 1:54 pm
by Steviec
Looking good, how many coats of spray did you use?

I think I would be tempted to smoke the reverse light though.

Re: My DIY all reds - in the process

Posted: Sun Mar 02, 2008 3:13 pm
by tha_lick
HAHA! great minds! my, "not finished yet" statement was for that exact reason! i used about 4-5 coats. . . i just kept putting the bit i was spraying against the other light to see how similar they look

one finished, and one not. . . infact their both not finished because iv still got to laquer the whole lot. . .

Image

now their finished lol, , , they both look the same, just cant be bothere to conect the camera up etc. . .


hop you like!

Re: My DIY all reds - in the process

Posted: Mon Mar 03, 2008 6:57 pm
by guizai
did the same thing with my green touring though I never thought about smoking the reverse lights. Post pics up with the lights on the car.

Re: My DIY all reds - in the process

Posted: Mon Mar 03, 2008 7:00 pm
by JGG1
They look quality! I think I'm going to do my touring this weekend! :D :D

Re: My DIY all reds - in the process

Posted: Tue Mar 04, 2008 8:29 pm
by Alex
:cool: i want to do them to mine is it easy to do, where did you get the spray paint from?, do you have to laquer them once its done?? :D

Re: My DIY all reds - in the process

Posted: Tue Mar 04, 2008 9:33 pm
by guizai
laquering them will help the color stay longer. I haven't and mine start to fade wear off after a 1 - 2 yrs which means I gotta respray them.

Re: My DIY all reds - in the process

Posted: Wed Mar 05, 2008 7:52 pm
by tha_lick
oh mate, its one of the eaies DIY mods iv done. . . just masked off the indicator and sprayed it with Folia tech Red tint from hal'frauds'. . . i kept matching them against the standar light to make sure i had the correct shade of red then just gave the indicator 2 coats of smoke spray. . . i laquered mine for 2reasons. . . i found rubbing the lights down gave the spray a much better surface to stick too also iv rubbed down all markings on the lights. . . so so 'E' markings or anything embosed, they are totally smooth 8)

i gave them 2coats of laquer, i was going to rub them and polish them out with tcut, but i like the sort of satin finish the laquer gave mine

cheers for the comments lads! pics this weekend as its always dark when i get home from work!!

Re: My DIY all reds - in the process

Posted: Wed Mar 05, 2008 8:14 pm
by Jay07
I started doing mine on the weekend, i bought a can of translucent red from ebay and a spare set of lights to play with. I didn't do as many coats as above as I was concerned with how dull the lights would become as well as being red rather than orange. I put on about 3 coats, i did not laquer. There is a dullness to the indicator but that doesnt bother me. With three coats you dont get an exact match. However its a toss up between exact colour match and functionality! Even with 3 coats i reckon the indictor is 50% dimmer...Its an easy mod to do, there's a guide in the articles section.

I might go back to it at some point and make it darker but right now iv got bigger problems with the car... damn thing has startd kangerooing again at idle (but thats another thread)!!!

Image

Re: My DIY all reds - in the process

Posted: Thu Mar 06, 2008 10:55 pm
by Mtech327
I sprayed mine aswell, about 4 coats did it!!

Image

Just watch out when it comes to the M.O.T. as they don't like red imdicators :(

Re: My DIY all reds - in the process

Posted: Tue Mar 11, 2008 7:33 pm
by sam325is
Neither do the police.i did some and could get them to flash orange so in the bin they went

Re: My DIY all reds - in the process

Posted: Wed Mar 12, 2008 1:18 am
by Jay07
Hmm police trouble... touch wood i haven't been stopped yet with them on but no doubt after posting this i'll be stopped tomorrow!! - I was more concerned about mot, so i bought a set from ebay to play with!

Re: My DIY all reds - in the process

Posted: Wed Mar 19, 2008 6:37 pm
by jazmxpro
Jay07 wrote:Hmm police trouble... touch wood i haven't been stopped yet with them on but no doubt after posting this i'll be stopped tomorrow!! - I was more concerned about mot, so i bought a set from ebay to play with!
Yep I swap between two sets as well, 1 red & 1 standard! As I could'nt get them to flash orange even with amber bulbs in! :(
Just don't use em if a police car is behind you! :?
Which reminds me almost that flippin time of the year to swap em round again! :mad:

Re: My DIY all reds - in the process

Posted: Thu Mar 20, 2008 1:01 am
by Jay07
Yep I've got my mot coming up too - Im tempted to try my luck!! winkeye

Re: My DIY all reds - in the process

Posted: Thu Mar 20, 2008 8:06 pm
by Bananaman
Are they an MOT failure???? guess all those old yank cars you see on road must have no MOT as they have red indactors.

Re: My DIY all reds - in the process

Posted: Thu Mar 20, 2008 9:15 pm
by Jay07
I've only ever heard it on the grapevine that they're illegal... I'm sure someone will confirm

Posted: Thu Mar 20, 2008 9:19 pm
by GrindCulture
I think they are illegal, I did mine myself with about 4 coats and some heat :twisted: I've still got some standard ones as well for the MOT, even though the black ones still shine through nicely in with every colour.

Re:

Posted: Fri Mar 21, 2008 2:38 am
by cliffybabe
i like'd eko's ights on his old motor red with smoked reverse looked spot on :cool:

Re:

Posted: Fri Mar 21, 2008 10:36 pm
by robbo86
been tempted to do mine, but i think it will be overkill on red if i do the reverse lights aswell as my car is burgundy.... dont want to find they are too dim though..... whagt are peoples general experiences