Why would you want to change the dial lights anyway?? the colour is from the plastic diffuser so different coloured bulbs would not change anything, and 3 watt max is so that they dont overheat and melt something!
but if you want to go ahead its fairly simple.
1. the panel between steering wheel cowel and instrument cluster comes off by removing the two nuts at the back (you need to remove the cover beneath the steering wheel first and advise you remove the steering wheel but not necessary).
2. two phillips at the top of the cluster surround, then remove the four (or six?)screws that were behind the first panel you removed at the bottom of the cluster.
3 pull out the plastic instrument surround
4 two philips again at the top hold the cluster to the dash with two tabs, remove.
5. ease the two tabs down and pull the cluster toward you from the top, it should slide outwards
6. reach behind and remove the multi pin connectors and whatever other wires are connected (different for different models/options etc, noting down exactly where the should go back to)
the mulitpins can be a pig, stick a small flat screwdriver between the male and female plug along the longer side and use a second srewdriver to prise up the black clip on top of the plug, with that out they just pull out.
7 the two big bulbholders are for your dashlights.
easy
dont go this far by the way.
mrlee
