Page 1 of 1
what size standard speakers for a 1992 cab
Posted: Mon Mar 02, 2015 12:53 pm
by Bally
hi what size speakers are standard fir to front and rear speakers as i want to upgrade mine but not make any holes also can any one recommend what speakers to get a nice bass sound not looking to blow the windows out just want a quality sound thanks
Re: what size standard speakers for a 1992 cab
Posted: Mon Mar 02, 2015 1:17 pm
by Kos
Size is 5.25"
You need to watch the mounting depths
Quality wise, there's lots out there, for sure Id be looking a components for the front
Got a budget in mind ?
Re: what size standard speakers for a 1992 cab
Posted: Mon Mar 02, 2015 5:02 pm
by Mitchen
Kos wrote:Quality wise, there's lots out there
Not true.. To meet the size and mounting depth requirements for front speakers, the quality available is very poor!
Re: what size standard speakers for a 1992 cab
Posted: Tue Mar 03, 2015 1:10 am
by Kos
Mitchen wrote:Kos wrote:Quality wise, there's lots out there
Not true.. To meet the size and mounting depth requirements for front speakers, the quality available is very poor!
while i did say watch the mounting depth to you, that doesnt change the fact that there are 100;s of 5.25" coax and components speakers available and many will fit
i'd put these in the front
http://caraudiosecurity.com/dsk130-2-wa ... components
Re: what size standard speakers for a 1992 cab
Posted: Tue Mar 03, 2015 3:40 am
by miniblob
Do we know what mounting depth us available???
If not, I might have a measure up at the weekend!!!
I've always ignored the mounting depth and never had anything not fit yet - but I've prob been lucky!!!
Had a play with my system the other day and with the 13W7 set low on the gain, I need something loud up front to work with it!!!
Wasn't even considering buying more speakers but am now tempted by these jbl's - although I suspect this could be when I meet the mounting depth issue!!!
http://www.caraudiodirect.co.uk/jbl-ms- ... components
For a quality sound, I've always loved dls components!!!
You'll want to put a bit of time & effort into the installation too - I've never had any speakers fit properly in the front of an e30!!! Always seems to be a bit of a gap, at least some of the way, around the speaker!!!
Re: what size standard speakers for a 1992 cab
Posted: Tue Mar 03, 2015 9:11 am
by Mitchen
I recently went through 3 sets of 5.25" 2 ways and none of them would fit. In the end I was so tired of the returns process of online shopping I decided to stick with the very average Alpine speakers already in there.
Re: what size standard speakers for a 1992 cab
Posted: Tue Mar 03, 2015 6:12 pm
by Kos
Miniblob
Look at hybrid audio. Just had studio Incar put some 6.5" in the e24 and fucking hell I'm blown away
Re: what size standard speakers for a 1992 cab
Posted: Tue Mar 03, 2015 7:22 pm
by jmc330i
miniblob wrote:Do we know what mounting depth us available???
I've got some speakers to fit with a mounting depth of 54mm. I'm sure I've read the available depth is around 58mm.
Re: what size standard speakers for a 1992 cab
Posted: Tue Mar 03, 2015 7:53 pm
by miniblob
Not heard of Hybrid Audio, but I'll have a look!!!
Really shouldn't be buying speakers - I've got too many already!!!
Got the bug again a little bit now I've been tweaking though!!!
Already got some top end CDT components that would fit, but with hardly any interior in, (so no covers) and still a bit of water getting in somewhere, I really don't want to waste them in there!!!