E30 Zone

HI FRIENDSԚ¡Ã”šÃ‚¡ I HAVE A BMW E30 325 E 2.7 1985 AND I HAVE SOME QUESTION IN THIS EXPERT FORUM...
- I HAVE ALL THE PARTS OF M TECHNIK II KIT FRONT AND REAR BUMPERS, SPOILER AND DOOR COVERS, ALL TO A FOUR DOOR CAR.

STILL NOT INSTALL THIS PARTS IN MY CAR, BECAUSE I HAVE SERIOUS DUDES....

ALL THE DOORS PARTS IT SEEMS FIT CORRECT, EXCEPT ONE PART OF THE REAR DOOR, BETWEEN THE REAR ARCHER AND THE REAR DOOR.
BUT, I CAN FIND TOO SOME PROBLEMS WITH THE BUMPERS FITTMENT? AND IF THIS PROBLEMS EXIST, CAN BE CORRECTED?

IS POSSIBLE FIND MORE PROBLEMS IN THE WAY OF THIS MODIFICATION.
HAS SOMEONE A REAL EXPERIENCE WITH REGARD TO THIS TOPIC?
THERE ARE SUBSTANTIAL DIFFERENCES IN THE DIMENSIONS OF THE MODELS OF THE CARS BEFORE AND AFTER THE YEAR 1985?
PLEASE I NEED HELP

yes the kit can be fitted with some work, put some photos up showing the problems you have

mate if your car is an 85 model then it is the pre-face lift with metal/chrome bumpers. the tech 2 kit is designed for the face lift plastic bumper cars. on the face lift the rear wheel arches were redesigned to allow more leg room in the rear seats, so a tech 2 kit will not fit onto a preface lift car without modification. that is not to say it cannot be done. you will also encounter problems with the rear bumper too as the mounting brackets are not the same. again it requires modification. use the zone search facility cause about a month ago someone had a thread on this job with great pictures.

mrlee

A1BMW325iSport? Where place you post the photos of the problems that i could have?
Thanks again for the kind advicesԚ¡Ã”šÃ‚¡Ãƒ”šÃ‚¡Ãƒ”šÃ‚¡Ãƒ”šÃ‚¡Ãƒ”šÃ‚¡

Regards,

Rodrigo.

BECAUSE I HAVE SERIOUS DUDES....

hmmm , sounds serious .. dude

SOMEBODY REALLY DO IT THIS JOB? PLEASE IF ANYBODY HAVE THE EXPERIENCE OF FIT THE M TECH 2 IN A BMW OF ALUMINIUN BUMPERS, SHARE WITH USԚ¡Ã”šÃ‚¡Ãƒ”šÃ‚¡Ãƒ”šÃ‚¡Ãƒ”šÃ‚¡Ãƒ”šÃ‚¡Ãƒ”šÃ‚¡Ãƒ”šÃ‚¡Ãƒ”šÃ‚¡Ãƒ”šÃ‚¡Ãƒ”šÃ‚¡Ãƒ”šÃ‚¡Ãƒ”šÃ‚¡Ãƒ”šÃ‚¡Ãƒ”šÃ‚¡Ãƒ”šÃ‚¡Ãƒ”šÃ‚¡Ãƒ”šÃ‚¡Ãƒ”šÃ‚¡Ãƒ”šÃ‚¡
PLEASE, WE ARE GOING TO GAIN THIS CHALLENGEԚ¡Ã”šÃ‚¡Ãƒ”šÃ‚¡Ãƒ”šÃ‚¡
LET'S DO OF THIS FORUM A CONCRETE RESPONSE.

LET'S USE OUR BRAINS AND LET'S PUT ALL OUR EFFORT IN KILLING THE MYTH.

WE ARE GOING TO DO IT Ԛ¡

M TECH2 IN A ALUMINIUM BUMPER MODELԚ¡Ã”šÃ‚¡Ãƒ”šÃ‚¡
DON'T STOP OF DREAM MY FRIENDSԚ¡Ã”šÃ‚¡Ãƒ”šÃ‚¡

i`m in the process of fitting mine at the moment


check out my recent thread....

http://www.e30zone.co.uk/modules.php?na ... ght=mounts