what spolier is this?
Posted: Mon Apr 20, 2009 7:53 pm
would like to know what the above spoilers are and if they are worth anything
would like to know what the above spoilers are and if they are worth anything
Page 1 of 1
would like to know what the above spoilers are and if they are worth anything
Re: what spolier is this?
Posted: Mon Apr 20, 2009 7:56 pm
They're standrd cabby M Tech-2 spoilers. They look exactly like Tech-2s so my moneys on that, its even got the little indent on the right I think? 
Posted: Mon Apr 20, 2009 8:17 pm
cabby tech 2 spoiler????first time i have ever heard such a thing.... thought (to the point of being quite sure) there was only 1 type of mtech 2 spoiler.
this appears to be a mtech 2 copy, the lower part of the spoiler should curve upwards to match the lines of the upper part, your appears to be the standard plastic/rubber boot spoiler with a second tech 2 copy added on top. The join where they meet at each edge of the upper and lower spoiler also do not appear standard
the orginials normally had M Technic stuck in a small recess just above the ''5'' of your 325 badge.
you can see a picture below of the badge and note the curve on the lower part of the spoiler.
as for its value somewhere around 10-20quid if copy or 30-50 quid if original.
good luck!!
this appears to be a mtech 2 copy, the lower part of the spoiler should curve upwards to match the lines of the upper part, your appears to be the standard plastic/rubber boot spoiler with a second tech 2 copy added on top. The join where they meet at each edge of the upper and lower spoiler also do not appear standard
the orginials normally had M Technic stuck in a small recess just above the ''5'' of your 325 badge.
you can see a picture below of the badge and note the curve on the lower part of the spoiler.
as for its value somewhere around 10-20quid if copy or 30-50 quid if original.
good luck!!
Posted: Mon Apr 20, 2009 8:20 pm
You know what I mean, I heard there were different kits for cabs and incidently assumed that there were different...mrLEE30 wrote:cabby tech 2 spoiler????first time i have ever heard such a thing.... thought (to the point of being quite sure) there was only 1 type of mtech 2 spoiler.
this appears to be a mtech 2 copy, the lower part of the spoiler should curve upwards to match the lines of the upper part, your appears to be the standard plastic/rubber boot spoiler with a second tech 2 copy added on top. The join where they meet at each edge of the upper and lower spoiler also do not appear standard
the orginials normally had M Technic stuck in a small recess just above the ''5'' of your 325 badge.
you can see a picture below.
as for its value somewhere around 10-20quid if copy or 30-50 quid if original.
good luck!!
You know what I mean!
You can see the little embedded region on the far right of the picture, but the MTech badge is missing.
Re:
Posted: Mon Apr 20, 2009 8:25 pm
think its a copy then
Re:
Posted: Mon Apr 20, 2009 8:30 pm
I agree!!hoikey wrote:think its a copy then
C2 for info the all tech 2 parts are same for tin top and cab except the lower sill covers, they are slightly different on a cab to cater for the wider sills required to make up for the lack of roof. then of course the 4 door/touring have different door pods to allow for rear door, but front/rear bumper and spoiler are identical accross the board.
mrlee
Re:
Posted: Mon Apr 20, 2009 8:41 pm
Plus sill covers differ between 2 and 4 door as 2 door have slots for the rear quarter pods to hook into.mrLEE30 wrote:I agree!!hoikey wrote:think its a copy then
C2 for info the all tech 2 parts are same for tin top and cab except the lower sill covers, they are slightly different on a cab to cater for the wider sills required to make up for the lack of roof. then of course the 4 door/touring have different door pods to allow for rear door, but front/rear bumper and spoiler are identical accross the board.
mrlee
The spoiler looks like a replica part to me too.