Boys,
Need help on a few things:
- My stereo isn't saving settings, so I am guessing it's missing the permanent power wire. Saying that, it has an ISO connecter so confused how that's the case. Any thoughts?
- I have some Pioneer E130Ci's installed in the front (http://www.pioneer.eu/uk/products/25/13 ... /page.html). They need to have the speaker grill spaced out since the front isn't sunk into the speaker hole - how have you guys done this? I don't really have facilities to make a spacer - can you buy them? (It looks like I can, unless you guys have any other ideas)
- I am getting some premium audio rears, do you have any ideas on speakers that would fit? I am assuming I can run the stock wiring into the crossover and have that under the rear shelf feeding the tweeter and woofer? I was thinking to have the same Pioneers in the rear that I have in the front
- For the front tweeters, I am putting the pioneer tweeters in the stock pods - I was going to hot glue them in there, unless you guys have any other suggestions that are a little more elegant?
Cheers!
Gus
Few questions...
Moderator: martauto
bump
Gus, you probably have the two live feeds the wrong way round hence losing the presets.
Yep - just fixed it yesterday. Life's much better...
now just to get those premium shells speakered up!
now just to get those premium shells speakered up!