E30 Zone

can you just fit bigger EURO m3 injectors to an is

what has he acctually done i dont get it there is not much explination, why all the m44 s50 stuff ???

erm made a 2044cc iS didnt you read it? light weight internals, and its into an e36 so i take it is an m44

2044cc M42 Build

--------------------------------------------------------------------------------

Specs.
M44B19 block (bored 86mm)
S50B30 pistons (decked), 86mm bore
M44 rods
M47 crankshaft, 88mm stroke
Stock head, intake and exhaust manifold.
Stock cams on stock timing
328i MAF with CAI
Dastek unichip
11.6:1 compression
100wkw@6000rpm at reef level.

Recipe for fun to me! hasn[t Tim_s done this?

Nice!

Thats the same route I'm planning to follow. 2044cc with E36 M3 throttle bodies. I already have the throttle bodies but its going to be a good few months before I can start thinking about building a motor.

There's a much longer thread on this engine on bimmerforums from when he built it a few years ago. Most impressive thing is the budget he did it on, less impressive are the pistons and standard cyl head etc. I seem to remember him quoting silly horsepower in previous threads, like 170whp, but in this thread he has a more sensible figure (100kw is about 134whp - in context 15whp more than agreens, 10whp less than mine, but the peak power is really not the whole story with the larger capacity).
agreen, shhh read and learn. so many questions! you can put pretty much any bosch injectors you want into an IS, it will run like shit though. Yours is fuelling nicely after the remap, so why change the injectors? That would be extremely dumb.

agreen, shhh read and learn

yes sir

in context 15whp more than agreens, 10whp less than mine,

cool

Yours is fuelling nicely after the remap

THANKS

hat would be extremely dumb.

thats me

cheers TIM

Has anyone got a link to the thread on bimmerforums?

Also Tim, I was wondering if you could give me a few links to your engine build as I know its been on a few forums. I've seen it on M42slub for one. Its much the same formula I have planned.

m42club and here are the only place i've posted about it really dude. Why don't you buy the car off me? My mate was supposed to have it, but he went and bought squeal's one, so I'm left a bit buggered at the mo! could easily break some bits off it and flog or flog it complete.

tim_s wrote:m42club and here are the only place i've posted about it really dude. Why don't you buy the car off me? My mate was supposed to have it, but he went and bought squeal's one, so I'm left a bit buggered at the mo! could easily break some bits off it and flog or flog it complete.

Hi mate,

I'm not sure I can justify breaking yet another 318is, but I could be interested if the price is right. The trouble is is's tend to hold a reasonable value. If you're serious about breaking, would you be willing to sell the engine and management?

It does seem a shame to break it though.

Chris.

Sorry for hijacking, I meant to send a PM!!

Nice thread...some good ideas going on

For the E36 318is I can get strut bars for the front as used on Kuhmo cars if interested..Cheers