E30 Zone

Here are some nwe picks of my 318is .

Nice looking car there Sir. Clean engine bay too

Nice car - good luck with it

Thanks , have done a few bits since taking the picks . It's had new brake discs and pads all round and the oil leak sorted that can be seen on the pick of the engion

mate, spray those rear indicators red and it will transform the car, they never flash orange mind but it does look good!

Good looking iS though, whats that on the viscous fan surround? looks like a load of grease or something?

It's oil which was comming from the timming chain tensioner plug washer. The rear lights are going to be smoked to match the frount and side indicators

Nice - i wish id bought a 318is rather than the 325 now, if only for the (assumed) better fuel economy. I like it. Take no offence from this, but does anyone think that them front splitters look better in black?

i wish id bought a 318is rather than the 325 now, if only for the (assumed) better fuel economy

mate, if you cane your iS it will have just as bad economy as a 325, you have to drive conservatively, ok on the motorways but it is difficult not to be a little more enthusiastic when you go through the twisties

Mots of the time i get about 26mpg from the iS . I would say that the frount spliters look bettre colour coded than black

nice car mate smack on the m-tec 2 kit on

stunning!

not too fussed about a body kit,have got an eyebrow to go on which is being painted at the moment and rest of frount grill is being done all black,(will post pick when all done)

Nice looking iS bud...another member of the M42 club

How about some se skirts? Now they would look sweet
Colour code the rear valance, give it a little drop and may be some pop out rear's and your away...tech 1 rear boot spoiler too...man i can't stop

How many miles has it done bud?

I had a similar oil leak like your's, but through my own stupidity....I left the oil cap off, after topping it up and drove off to work, only realised when it started to sound fubar'd

Pal

The car has done 133600 . It needs new shocks so will most prob drop it at the same time ,Not sure how much to drop it though.

have fitted eybrow


A good polish aswell

very nice car, until i saw the last to pictures, not my cup of tea but it is your car after all.

nice car mate like the eyebrow looks mean

Looks like a nice car mate, very clean. Personally i dont think that mono-brow does it any favours tho. Your car so what ever makes you happy!

Liked the first pix but that monobrow thing is not cool buddy - just not needed.

Less is more.

Got some SE skirts to go on (Cheers Beardymat)

like the car alot apart from the brow!!

the polish helped too by the look of it - you still need a porter cable on it... it would come up better than new.

Nice car mate, are you anywhere near poynton coz im sure ive ssen your car round here ? LOOKS MINT.

boxclever1753 wrote: you still need a porter cable on it.

Dont go up your way much e36boy .warrington about as close as i get.

Nice looking car you have looks very clean

scottywb wrote:

boxclever1753 wrote: you still need a porter cable on it.

is a random orbit polisher - all the pro-detailers have them... not as harsh as a rotary.... i had my last car done and it took all the swirls out of the paint and brought it back to a wet look finish.. awesome.

my 323 is being done in a couple of weeks time..

Used a electric buffer but it was only cheep one ,will try out one of thoes

http://www.e30zone.net/modules.php?name ... ht=#672955

here you go -- a thread which shows the difference.... it is an amazing kit in the right hands...

Car looks good. And good on you with the monobrow. looks different to the usual.

hammoj28 wrote: good on you with the monobrow. looks different to the usual.

Cheers Hammo

Fitted some carbon badges


And a numberplate surround


M-TEC 1 boot sploier in the pipeline,still got to fit the SE side skirts(need a plate welding in the offside sill as i have found a small rust hole)

Been a while sihce i updated the thred ,The monobrow has now gone !!!
I have fittde a carbon dial surround and a induction kit.



Scott