Page 1 of 1
1986 325 Sport M-tech 1
Posted: Wed Jan 12, 2005 2:27 pm
by zaust
Engine: new head re profiled fast rd cam, larger exhaust valves, porting + gas flowed, matching custom exhaust maifold(2 x 3 into 1, then 2 into 1
straight through to back box),fuel press up @3.6, piper induction,
chip,larger TB,oymex speed sys with adjustable soft cut for revs.
Chaiss: Eibach springs 60mm all round,o/e m shocks, rear adj camber.
eibach strut brace,alpina reps shod in good y f1 215/40/17
Brakes: good r hoses, ecb disc's x4, Foredo track pads, o/e calipers.
silver dials, ac pedals, e28 m5 gear knob (shows dog leg)
4 point harness x2,
Eye brows,e30zone sticker,white front and side indicators.
super charger to come..
Posted: Wed Jan 12, 2005 2:37 pm
by tylerma
very nice mate
looks good in the flesh too
and sounds the business
Posted: Wed Jan 12, 2005 3:37 pm
by greg325
in black it just looks great, i really need to get some of those bigger rims...
on this it just looks ideal.....
Posted: Wed Jan 12, 2005 10:38 pm
by Splondike
When did you drop in the 5.2 mate
Looking good though...
Posted: Wed Jan 12, 2005 10:47 pm
by jitvv
very nice mate!! no wonder it goes so well with them mods!!
Jit
Posted: Thu Jan 13, 2005 3:00 pm
by zaust
ahh thanks guys
been looking at bss f1's in 18s deep dish but i'd rather spend the cash on the engine for now,
or what abut getting the pinas done in black crome??
Posted: Thu Jan 13, 2005 5:08 pm
by greg325
or what abut getting the pinas done in black crome??[
don't ...id just wouldn't look beter and i think the engine deservs the doe...you allready have a good top end and great specs, i'd invest a litle in the lower side but keep it M20
Posted: Thu Jan 13, 2005 5:37 pm
by zaust
greg325 wrote:or what abut getting the pinas done in black crome??[
don't ...id just wouldn't look beter and i think the engine deservs the doe...you allready have a good top end and great specs, i'd invest a litle in the lower side but keep it M20
when the bottom looses comp i will do 2,7 any way
already have the crank and fly wheel clutch ..lol
but the bottom end at persent is original and has just under 200k on it..
vortex super charger planned aswell. but that will be a while..[/b]
Posted: Fri Jan 14, 2005 9:30 pm
by Karan
nice car marc, goes well for a 2.5 as well!! proper old skool
forget the wheels-get a low comp 2.7 plus a charger on there
Karan
Posted: Sat Jan 15, 2005 4:27 pm
by zaust
Splondike wrote:When did you drop in the 5.2 mate
Looking good though...
well spotted . ( i wish 8 pot mmmm)
Posted: Sat Jan 15, 2005 8:37 pm
by placey
m-tech 1 and alpinas in black. wanna sell it to me? i like it that much i'd keep it in the lounge in front of my telly!
paul
Posted: Sat Jan 15, 2005 8:49 pm
by rare
Looks great, brilliant combination of wheels/colour/m tech
Posted: Fri Jan 21, 2005 2:18 pm
by zaust
Lether recaros going in over the weekend. at last.
can't wait .
Posted: Thu Apr 14, 2005 8:14 pm
by e30sal
Very sexy looking motor...
Posted: Fri Apr 15, 2005 10:38 pm
by willow
What a great looking sport - it's the business
Posted: Fri Apr 15, 2005 10:44 pm
by Karan
LOL just noticed the 2.7 beater thing..... what 2.7 did u beat then?
haha
Posted: Sun Apr 17, 2005 8:53 pm
by zaust
Karan wrote:LOL just noticed the 2.7 beater thing..... what 2.7 did u beat then?
haha
we havent had the plesure of going for it proply yet !!!
always been something in the way..
Posted: Sun Apr 17, 2005 9:42 pm
by Karan
zaust wrote:Karan wrote:LOL just noticed the 2.7 beater thing..... what 2.7 did u beat then?
haha
we havent had the plesure of going for it proply yet !!!
always been something in the way..
LOL
so have u found a shell yet dude?
Posted: Mon Apr 18, 2005 1:46 pm
by zaust
na still looking. not easy thing to find (2 door metal bumper) in good nik
any thing will do. but still fixin the other one....taking ages..
Posted: Mon Apr 18, 2005 5:01 pm
by Karan
zaust wrote:na still looking. not easy thing to find (2 door metal bumper) in good nik
any thing will do. but still fixin the other one....taking ages..
did u find a lump for the 1.8?
if u need a hand with any bits try me and i'll see as i had one of these and rebuilt the head on the m40 too.... i have lots of bits like the cam timing tool thingy lying around!
Karan
Posted: Tue Apr 19, 2005 8:41 pm
by zaust
yes a lump to buy it for 70 quid he he. was a c reg 4 door with 1 lady owner that never cleaned it and then me who killed it. full of rot. no elec windows pas or cdl + steel wheels.. a real stunner in white..ish.
Posted: Wed Apr 20, 2005 12:13 am
by Chaos
y do u want to reshell that.
it looks mint
Posted: Wed Apr 20, 2005 1:15 am
by badnan
nice motor
Posted: Thu Apr 21, 2005 10:40 pm
by zaust
has a v shape in drivers side and the floors fooked.. got andys old car now it will make a good car again..
Posted: Mon Jun 20, 2005 4:57 pm
by zaust
ALL DONE AT LAST LOOKS EXACTLY THE SAME DRIVES THE SAME
JUST A DIFFERENT NUMBER PLATE..
PICS TOMORROW...
Posted: Mon Jun 20, 2005 9:18 pm
by johnono
wahey! good that man!
wheres those pics then
Posted: Tue Jun 21, 2005 9:48 am
by Karan
zaust wrote:ALL DONE AT LAST LOOKS EXACTLY THE SAME DRIVES THE SAME
JUST A DIFFERENT NUMBER PLATE..
PICS TOMORROW...
Posted: Tue Jun 21, 2005 10:01 am
by Geeman
Pics pics pics pics pics!
Posted: Tue Jun 21, 2005 11:45 am
by zaust
but now low down..
Posted: Tue Jun 21, 2005 11:39 pm
by johnono
well done mate, lookin crisp!
Posted: Wed Jun 22, 2005 12:28 am
by Fonzi
Hello
your M-Tech is very good !!!
Felicitations !
Posted: Wed Jun 22, 2005 1:07 am
by coldo
Looks sweet, love the alpina's
Nice
Re: 1986 325 sport Mk1 (2.7 beater reshelled)
Posted: Fri Nov 11, 2005 1:27 pm
by zaust
zaust wrote:Engine: new head re profiled fast rd cam, larger exhaust valves, porting + gas flowed, matching custom exhaust maifold(2 x 3 into 1, then 2 into 1
straight through to back box),fuel press up @2.9, piper induction,
chip,larger TB,oymex speed sys with adjustable soft cut for revs.
Chaiss: Eibach springs 60mm all round,o/e m shocks, rear adj camber.
eibach strut brace,alpina reps shod in good y f1 215/40/17
Brakes: good r hoses, ecb disc's x4, Foredo track pads, o/e calipers.
silver dials, ac pedals, e28 m5 gear knob (shows dog leg)
4 point harness x2,
Eye brows,e30zone sticker,white front and side indicators.
super charger to come..
Now finnished for a bit.. made a few changes here and there. best change
though is the o/e alpina wheels.. got springs made to drop the front another 20mm but wont do that till the new year.
i have got all the center caps on now. will sort some more pics..
