E30 Zone

Hello. I'm Andrew and I quite like "stance" and all that lot.

I've had two e30s - seen together in the image below. I sold the first one in 2011 and it was the biggest mistake I made, so the black one shall never be sold!!



They were both 320i Tourings. So very smooth, but a bit gutless. First port of call - b25 swap. My first ever engine swap!

Going under the knife:


These turned up:






Then some other things happened - camber top mounts, gaz RPM coilovers, some re-fitting of parts.



Then Monday MOT was achieved - first drive since January 2012!



Going to tidy and clean her up over the next few weeks, ready to take to some shows in the second half of the year - retro rides gathering etc.

Very nice I like that a lot, tourings are my favourite.

Nice car, cool workspace

Was going to say liking the work area aha. Any long term plans?

Wheels look shite if you asking for ideas!

Excuse me but erm, LOW?! I spy arch gap...lol

Digit wrote:Excuse me but erm, LOW?! I spy arch gap...lol

Thought that myself

Title should be changed to 'lowered touring'

Glad someone else uses "lowered" and "low" as two seperate statements! lol

Hehe... MOT spec! It made it onto the ramp and off again no problem with that ride height.

I went to "Japfest 2" at Donington this weekend - managed to infiltrate it with the E30

Really do like the wheels mate! Gap needs sorting though lol

nice car man i also have a touring on grid vs what spec are yours? i have 15x9 on the back and 15x8 with 12mm spacers and camber plates on the front they where originally on my mx5 but they look good on a low touring

Thanks. I'm going to "Stancism" next weekend, and the arch gap will be gone before then.

The Grid V's are 8", ET0 all around. Rears have 195 width tyres, fronts 175. I have a 10mm spacer up front to clear the calipers - does the job just fine

I love these wheels on MX5s too - I'm very tempted by Mk1 MX5's at the moment...

nice i wasnt sure if 10mm would work so i just went for 12 to be safe hahaa and i have 195/50 all round and alot off arch rolling :/ ha

Rolling arches is this weekend's #1 job. I'm determined to roll, but not flare!

very nice mate

Went to a show in Essex last weekend at Battlesbridge. Was good fun.



Took part in a "car limbo" - we came in at 49", which I was pretty proud of! The winner was 44", an mx5 of course.



Also I've decided I really don't like the front tyres - they are far too stretched, meaning I can't tuck them up to the arches. Next payday they are going 10mm wider.

Nice, I have just got my first E30 and it's a touring. Those wheels look good, just trying to work out what to get myself but is a little tricky not knowing what will fit and what wont. I don't want to be rolling arches etc really.

Should have had different classes for the limbo, kind of cheating putting the mx5 against yer bavarian beauty

dude get a decent side pic of your car rocking those rimz

looking good man

Awesome wheels!

And again, Love the wheels.

'Stancism' "To all you OCD clean freaks, those running major lows and the smoothed out crews + many more rocking cool whips"

Gutted I missed it, sounds dope , like the entrants

It was in Essex, what did you expect?!

Selling the wheels because i've bought some banded steel wheels.
http://www.e30zone.net/modules.php?name ... c&t=241912

I was parked opposite your E30 yesterday at RRG, looked awesome (I had the ratty green E30 320i and the goldish E23)

Ahh awesome! Thanks very much!

I had a good look at both your cars - you might have cost me a bit of cash though! My girlfriend saw your E30 and decided she wants a set of mims now...

The E23 was very cool, that uber beige interior looks like a very comfortable place to be!

Sorry if ive missed it but whats the diameter of the Rota's?

And also you state your on coilovers. Are you running insert struts or converted to proper coilovers?

How much adjustment have you got left on them as I have just purchased an e30 touring and I plan on going properly low, like zero arch gap on 17's.

Car looks sweet btw, good combo with the modern rota's

Sorry if ive missed it but whats the diameter of the Rota's?

And also you state your on coilovers. Are you running insert struts or converted to proper coilovers?

How much adjustment have you got left on them as I have just purchased an e30 touring and I plan on going properly low, like zero arch gap on 17's.

Car looks sweet btw, good combo with the modern rota's

Thanks.

The coilovers are Gaz GHAs, which are proper coilover conversions - not the Rally Design weld on stuff, or the eBay cheap ones.

They will sit on the floor at the front before they are would down fully. But don't expect a comfy ride out of them!

The Rotas are 15x8, et0. But the fronts have a 10mm spacer on them, which pushes them out too far. If you want to go LOW, don't go over 16" on the wheels. You'll be in the top of the arch wells before you get the chassis close to the ground.

Any nice shots of her on the steelies yet??

Sadly not. There has been a delay at the powder coater, and now they won't be ready for Players Show this weekend. Bit gutted.

Awh

Be sure to get some up as soon as they are on

STILL not got my banded steels

Having some amusing issues with my speedo too:

whats taking these steelies soooo long

and alot of people on here wont be able to see that piccy mate due to lack of instagram acounts

The Instagram link was only a nice video of my speedo failing. It's fully stopped working now.

Steelies finally arrived - and they're on!! Note for any future BMW Mini steel banders - e30s need a 3mm spacer to clear the caliper. I had to go to Halfrauds and buy some badman Ripspeed spacers!

Bit annoyed - 3 of them have pinholes in the welds. Going to see if I can get them welded up properly, rather than running seam sealant along the welds.

Specs are:
15x8j et3 (et0 with spacer), 195/50 15
15x8.5j et -8, 205/50 15