E30 Zone

Posted: **Sat Mar 26, 2011 5:21 pm**

For those who havent seen this in the engine swap section here my touring project almost ready for its mot .

Still have to fit the 60/40 cupkit ,smoke the headlights and fit the hid's.Which i'll do once the mot is passed.

Link to the build thread if anyone wants a look.

http://www.e30zone.net/modules.php?name ... c&t=185411

The Halfords m-power badge was there when i bought it and it aint staying btw

Posted: **Sat Mar 26, 2011 5:31 pm**

very good work that Man

i'm sold on that e36 air box ,

the front arch gap is different,look at them one side is higher no ?

somethings not right m8.

Posted: **Sun Mar 27, 2011 4:46 pm**

Thanks magpie

Posted: **Sun Mar 27, 2011 4:54 pm**

Took it for a spin yet Jake?

Posted: **Sun Mar 27, 2011 4:57 pm**

Not yet Dan.
Have it booked in for an mot on Saturday so it should be road legal the week after that.
Still have to figure out the issue with the revs but thats about it.

Posted: **Sun Mar 27, 2011 7:17 pm**

Stunning mate, looking forward to seeing this in the flesh!!

Posted: **Mon Mar 28, 2011 10:13 pm**

very impressive work Jake

Posted: **Mon Mar 28, 2011 10:17 pm**

When u doing mine then Jake???

Posted: **Tue Mar 29, 2011 12:12 am**

I want an m52 touring in green!

Posted: **Tue Mar 29, 2011 12:28 am**

robbo86 wrote:I want an m52 touring in green!

I know of one in the making

Looks really well, just like it was meant to be! I better get cracking on my own!

Posted: **Tue Mar 29, 2011 12:29 am**

Jozi wrote:
robbo86 wrote:I want an m52 touring in green!
I know of one in the making

Looks really well, just like it was meant to be! I better get cracking on my own!

Posted: **Tue Mar 29, 2011 12:31 am**

Not mine though, unfortunately. Mines going to be Mauritius Blue

Posted: **Tue Mar 29, 2011 12:38 am**

Well still

because they got it and I want it!

Posted: **Tue Mar 29, 2011 7:20 am**

Thanks for the comments guys

magpie wrote:very good work that Man

i'm sold on that e36 air box ,

the front arch gap is different,look at them one side is higher no ? somethings not right m8.

Its because the drive is on a slope and angle.

Posted: **Tue Mar 29, 2011 7:23 am**

Sanchez wrote:When u doing mine then Jake???

You'll manage it Peter.
Dan now does all the bits that are apita for a good price so it doesnt have to be as hard a swap as it used to be

.

Posted: **Tue Mar 29, 2011 8:06 am**

Looks well, congrats on getting her all finished and good luck with the MOT

Posted: **Tue Mar 29, 2011 9:10 am**

does it have IX running gear?

Posted: **Tue Mar 29, 2011 8:37 pm**

pac1982 wrote:does it have IX running gear?

What makes you think that ,the ride hieght?

Posted: **Tue Mar 29, 2011 11:43 pm**

Stella job, engine bay got the factory look, very cool

Posted: **Mon Apr 11, 2011 4:39 pm**

H&R 60/40 cupkit is on .Also fitted e46 rear topmounts,z3 plates and new front mounts.

The cupkit was for a coupe and tbh the back is sitting to low for my liking.I'm thinking of sticking the kyb springs back on until i can find proper touring H&R one.

So if anyone has a set of H&R -40 touring springs and needing coupe ones give me a shout

Posted: **Mon Apr 11, 2011 6:13 pm**

thought this might happen jake. can you not put the thicker rubber stops in with the springs? ok it's only a few mil but it might be all you need.

Posted: **Mon Apr 11, 2011 6:37 pm**

Reckon its dropped about 55mm rather than 40 so i'm look to go back up about 15mm.
I'll stick the kyb's back on as i'm sure they are slightly shorter than standard so might look ok.
I'll have to put them on anyway as there is no way the guy will get the tracking gear on the rear wheel the way it is the now.

Posted: **Mon Apr 11, 2011 6:52 pm**

I like this.....

Posted: **Mon Apr 11, 2011 8:27 pm**

Looking good Sheds

Posted: **Mon Apr 11, 2011 8:33 pm**

very nice

Posted: **Mon Apr 11, 2011 8:43 pm**

Thanks for the comments guys.

Posted: **Mon Apr 11, 2011 9:43 pm**

Very very nice. Wish my touring looked half as good as yours.

Posted: **Wed Apr 13, 2011 9:29 am**

Swapped the sparco strut brace onto the red m30 and fitted the rpm one on this as i didnt like the red in the engine bay.

Also fitted smoked headlights and hid's

Just need an i.s lip spoiler to finish of the styling now.

Posted: **Wed Apr 13, 2011 7:47 pm**

Very nice touring, looks well with the blacked out front

Posted: **Thu Apr 14, 2011 12:22 am**

Nice!

I'm just about ready to replaced suspension components on my touring.

I want to make sure the front and rear is level do you know the part number for springs and shocks designed for Tourings? H&R?

Posted: **Thu Apr 14, 2011 7:01 am**

Not looked into it yet but i'm planning on it today.
If i find the right ones i'll let you know.

Posted: **Thu Apr 14, 2011 7:05 am**

cbouchez wrote:Nice!

I'm just about ready to replaced suspension components on my touring.

I want to make sure the front and rear is level do you know the part number for springs and shocks designed for Tourings? H&R?

A quick google brought this up .
http://www.dcperformance.co.uk/cheap/48 ... 29684.html

Those are -30

Posted: **Sun Apr 17, 2011 3:09 pm**

Changed the rear springs again .Think i'm happy now with the drop at the rear.

Stuck on a scorpion Le-Mans back box

Posted: **Sun Apr 17, 2011 3:11 pm**

Looking good with them springs. How is the sump for clearance with normal day to day driving?

Posted: **Sun Apr 17, 2011 3:16 pm**

It is bad .I have only went over one speed hump and if was fine,it wasnt a big ones tho.

I am going to get a sump guard just havent decided if i'll make one or get the rpm one yet.

E30 Zone

M52 Touring

M52 Touring

Re: M52 Touring

Re: M52 Touring

Re: M52 Touring

Re: M52 Touring

Re: M52 Touring

Re: M52 Touring

Re: M52 Touring

Re: M52 Touring

Re: M52 Touring

Re: M52 Touring

Re: M52 Touring

Re: M52 Touring

Re: M52 Touring

Re: M52 Touring

Re: M52 Touring

Re: M52 Touring

Re: M52 Touring

Re:

Re:

Re:

Re:

Re:

Re:

Re:

Re:

Re:

Re:

Re:

Re:

Re:

Re:

Re:

Re: