Page 1 of 1
My Sport finished ...
Posted: Sun Oct 17, 2010 10:59 pm
by spic
Thought i would share a few pics of my sport that i have been working on for the last 7 months...its mainly going to be my DRT along with a little track work over here , theres not much i havnt done to it but its very near where i want it now ...
Re: My Sport nearly finished ...
Posted: Mon Oct 18, 2010 12:01 am
by /// KAMI
looks nice how much was the roll cage?
Re: My Sport nearly finished ...
Posted: Mon Oct 18, 2010 12:04 am
by FourSTAR
Very nice car mate, 7 months well spent!
Re: My Sport nearly finished ...
Posted: Mon Oct 18, 2010 12:53 am
by Kos
/// KAMI wrote:looks nice how much was the roll cage?
i'd be more concerned about the fitting of it, then look at the price
safety devises do a rear half for about £450 and it fits properly and has re enforcing plates.
Re: My Sport nearly finished ...
Posted: Mon Oct 18, 2010 10:33 pm
by spic
/// KAMI wrote:looks nice how much was the roll cage?
Kos is right they can be a real hassle to fit and unless i had the car stripped right out then i probably wouldn't bother, The cage is from caged and was originally a bolt in but i ended up welding it in whopping a load of seamsealer over the plates then painting it in .
Re: My Sport nearly finished ...
Posted: Mon Oct 18, 2010 10:42 pm
by magpie
nice build and very nice colour.
most on here remove engine and box together as it's less chew to refit.
good work.

Re: My Sport nearly finished ...
Posted: Tue Oct 19, 2010 3:55 pm
by Kos
its doesnt look like it has fitting plates?
the SD ones have some strong box sections which get welded in for the feet to bolt to and they tuck up close to the B pillar.
BTW you car looks pretty goood
Re: My Sport nearly finished ...
Posted: Tue Oct 19, 2010 6:01 pm
by Jim78
Looking good - what did you use to paint the interior? Proper paint or Hammerite!?
Re: My Sport nearly finished ...
Posted: Tue Oct 19, 2010 9:01 pm
by spic
Kos wrote:its doesnt look like it has fitting plates?
the SD ones have some strong box sections which get welded in for the feet to bolt to and they tuck up close to the B pillar.
BTW you car looks pretty goood
Didnt bother making up the boxes and just welded the foot plates direct to the car as thats what i would have been doing if i was going to bolt it in and the same for the rear, i then blended the paltes in with seamsealer then added paint...
Re: My Sport nearly finished ...
Posted: Tue Oct 19, 2010 9:30 pm
by spic
Jim78 wrote:Looking good - what did you use to paint the interior? Proper paint or Hammerite!?
I used Upol Gravi Tex paintable stonechip through a stone chip gun inside the car and boot area, easy to clean, hides many imperfections and if later i think i want to paint it i can just go straight over the top of it ...
Re: My Sport nearly finished ...
Posted: Wed Oct 20, 2010 3:16 pm
by Kos
the safety devises cages for e30's have the box sections ready made for the B pillar and strengthening plates for the other feet.
imo they are vital as the metal in these areas is quite thin and would rip in the event of a major impact.
Re: My Sport nearly finished ...
Posted: Wed Oct 20, 2010 5:12 pm
by Jim78
spic wrote:Jim78 wrote:Looking good - what did you use to paint the interior? Proper paint or Hammerite!?
I used Upol Gravi Tex paintable stonechip through a stone chip gun inside the car and boot area, easy to clean, hides many imperfections and if later i think i want to paint it i can just go straight over the top of it ...
Good idea!
Re: My Sport nearly finished ...
Posted: Tue Oct 26, 2010 10:44 pm
by spic
Just a few more pics, all done realy except for a few minor things ....Like a new fuel tank ...

Re: My Sport nearly finished ...
Posted: Tue Oct 26, 2010 10:51 pm
by staley_turbo
Nicely done. I like
