Council White pride and joy update pag 3

[StefanAnghel]

September 2008

[StefanAnghel]

February 2009

[StefanAnghel]

March 2009

[StefanAnghel]

on progress:
Recaro "high back" fit (Done)

To do list:
fit rear discs conversion
fit front 51mm legs with vented discs
with gas suspension and braided lines

buy 4.10 small case diff

[StefanAnghel]

[Westy35]

Nice beemer mate,mines Alpine grey at the mo,hope i can get it back that white!! What do you use?:)

[StefanAnghel]

I used T-cut and white polisher cheap ones 5 pounds each last summer!
Since then wax every now and then!

[denzil318]

like the ride brother, i want your wheels they look sweet black..nice work homes....

[StefanAnghel]

[ade36]

looks as low as mine use 2 on the back whats the lower mm?
my rear springs were heated up 2 get down low

Looks very tidy! Does the heating springs work or do you have trouble getting it level? Desperate to get mine lower at the back and looking for a quick fix

[StefanAnghel]

I think that you will have some trouble getting it level...

mine was -60mm on some aftermarket springs and changed them after I cracked my exhaust from manifold in a speed bump!

What car you have? I have the old springs available for sale if you're interested!

[calpol]

mate that has a lovely stance how you get it that low?

[ade36]

I think that you will have some trouble getting it level...

mine was -60mm on some aftermarket springs and changed them after I cracked my exhaust from manifold in a speed bump!

What car you have? I have the old springs available for sale if you're interested!

Got an '89 318. Was just after a quick fix as dropping an M52 lump in it in a couple of months and will obviously have to reassess the suspension then. Ended up cutting the front springs and now looking for a cheap fix for the rear to level things out

[StefanAnghel]

Everyone is updating their topics....so am I...

Fitted:
Front complete struts 51mm,
Vented discs,
-40 Sparx springs from Bazz666 (Thanks fella)
BOGE gas shocks (Thanks Darrenn...hope I’m right, sorry if not)
Braided brake lines thanks to Spadge
325 ARB Thanks to SHAZ325iSPORT

All this after good clean and 2 layers of under seal
Pics are on the way...

[StefanAnghel]

Rear discs conversion --Done

[StefanAnghel]

[StefanAnghel]

back to council look...

[StefanAnghel]

Thinks to sort out....

Front and Rear valance




aerial hole


under hood glue


all the wires behind the lights

[StefanAnghel]

retrim job done...

[StefanAnghel]

latest addition

[StefanAnghel]

Some updates..

[StefanAnghel]

new valance

[Falkster]

That valance look very nice.

[oomz1975]

That valance looks so mint, spray the oil cooler vent black, to match the lip.

[StefanAnghel]

That valance looks so mint, spray the oil cooler vent black, to match the lip.

I like the look the car has (like in my sig picture)

the cooler black looks like a "tiny mouth"

[StefanAnghel]

front valance on
http://www.e30zone.net/modules.php?name ... highlight=

[StefanAnghel]

Look what I've received this morning...





Uploaded with ImageShack.us
all the way from Germany...and not cheap I can say that

[StefanAnghel]

Question for you guys ...how much a spoilerless boot lit is evaluated?
I might look for one to have that clean look

[ImysE30]

Them wheels look awesome

Spoilerless fot that clean euro look

[Tommek]

I like the angel eyes very much. Are they CCFL or LED ones? Nice car btw

[StefanAnghel]

I like the angel eyes very much. Are they CCFL or LED ones? Nice car btw

Thanks
CCFL but good quality I think

[StefanAnghel]

This is how it looks at the moment with a fresh MOT

[Coops90]

Good work on the brocks