Page 1 of 1
part no for 320i fuel pump
Posted: Sun Nov 11, 2007 7:50 pm
by mk1nurburg
.... pretty much as above.... does anyone know what the fuel pump part no. is for a 320i e30??
ive got a pump that will cover part no's:
16 12 1 115 862
16 14 1 178 751
16 14 1 179 232
are these stand alone pumps as opposed to in tank pumps?? thanks. paul
Re: part no for 320i fuel pump
Posted: Sun Nov 11, 2007 8:02 pm
by smithy318i
1987 > internal fuel pump 16 14 1 184 022
Re: part no for 320i fuel pump
Posted: Sun Nov 11, 2007 8:05 pm
by mk1nurburg
ta buddy ....... '>' stands for 87 onwards?? sorry i can never remember which way round those symbols work.
ta. paul
Re: part no for 320i fuel pump
Posted: Sun Nov 11, 2007 8:08 pm
by smithy318i
> greater than
< less than
Re: part no for 320i fuel pump
Posted: Sun Nov 11, 2007 8:15 pm
by mk1nurburg
ta mate, shame, i thought the pump i had here spare would be a nice coincidental direct replacement. never mind.
thanks for the info.
cheers. paul
Re: part no for 320i fuel pump
Posted: Sun Nov 11, 2007 10:28 pm
by smithy318i
16 12 1 115 862
E12 M535i
16 14 1 178 751
318i/320i/325e/M3
16 14 1 179 232
520i/525e/535i/M535i/628CSi/635CSi/M635CSi
751 might fit !
Re: part no for 320i fuel pump
Posted: Sun Nov 11, 2007 10:39 pm
by Brianmoooore
All those numbers are too confusing for me!
Up to about 1988 E30s used a two pump system - a lift pump in the tank and a pressure pump in front of the LH rear wheel arch.
Sometime in 1988 these two pumps were replaced by a single in tank pump. This later pump is a direct physical replacement for the earlier pump, and I would recommend anyone having problems with an early set up to fit the later type, remove the wheelarch pump, link its in and out pipework together, and tie back and insulate its wiring.