Page 1 of 1
four branch manifold
Posted: Tue Aug 07, 2007 4:11 pm
by conleth318is
will a four branch manifold fit a rhd 318is
Re: four branch manifold
Posted: Tue Aug 07, 2007 4:14 pm
by Hyperion
Hi and welcome to the Zone... Have you got a 4 branch from another model e30 (m3,316 etc) or you looking to get a custom job?
Re: four branch manifold
Posted: Tue Aug 07, 2007 4:20 pm
by conleth318is
no was lookin on ebay and found one for around two euro
Re: four branch manifold
Posted: Tue Aug 07, 2007 4:29 pm
by Hyperion
ok, well the 318is is a 4pot engine so you gonna be looking for a 4 pot branch system, but it will have to be for the right hand drive model, because it needs to get by the steering.
Re: four branch manifold
Posted: Tue Aug 07, 2007 4:35 pm
by conleth318is
i was thinkin that i would fall into problems with the steering alright i wonder where i would get one custom made and would it give much extra power
Re: four branch manifold
Posted: Wed Aug 08, 2007 4:53 pm
by Hyperion
Which area you from, i might need to be corrected but i think the Zone Shop might have something for you.Click on the button at the top of the page.
Re: four branch manifold
Posted: Wed Aug 08, 2007 4:56 pm
by Theo
The 318is come with a tubular (4 branch) manifold as standard.
Re: four branch manifold
Posted: Wed Aug 08, 2007 9:11 pm
by conleth318is
but is the is not four into two instead of four into one
Re: four branch manifold
Posted: Wed Aug 08, 2007 9:14 pm
by maxfield
From what I've read the 318iS factory system is excellent!