Can someone scan in a page from Bently? PAS?
Posted: Fri May 11, 2007 10:07 pm
Can someone scan me the page that shows you how to change the power steering belt?
Cheers, very much appreciated!
Cheers, very much appreciated!
E30 Zone
The Largest Online E30 Community
https://www.e30zone.net/forum/
Can someone scan in a page from Bently? PAS?
Page 1 of 1
Re: Can someone scan in a page from Bently? PAS?
Posted: Fri May 11, 2007 11:05 pm
why not have al look in the service manual in the links section it should tell you there!
Re: Can someone scan in a page from Bently? PAS?
Posted: Fri May 11, 2007 11:10 pm
I've had a look in my Haynes (number 1948, 3 & 5 series 83 - 91) and Bentley (84 - 90) and neither have instructions specifically for replacing the pas belt.
There's lots of info on replacing them in general and pictures of the adjuster on the pump, but that's in the Haynes manual.
There's lots of info on replacing them in general and pictures of the adjuster on the pump, but that's in the Haynes manual.
Re: Can someone scan in a page from Bently? PAS?
Posted: Sat May 12, 2007 1:00 am
Re: Can someone scan in a page from Bently? PAS?
Posted: Sun May 13, 2007 2:04 pm
Thanks guys, aus325, you the man!
Re: Can someone scan in a page from Bently? PAS?
Posted: Sun May 13, 2007 2:12 pm
remember to slacken off all the pump mounting bolts before trying to re tension the belt with the adjuster or it will just strip the teeth. 
Re: Can someone scan in a page from Bently? PAS?
Posted: Sun May 13, 2007 10:34 pm
Yeah it's probably not a bad idea to go to the dealer and get a new adjuster nut. Mine was in a bad way when I did my cambelt and I couldn't get the correct tension without it slipping. A new nut and adjustment bar cost next to nothing, but will save any headaches when you re-assemble.