H&R roll bar problem
Posted: Sun Jan 28, 2007 3:50 pm
on full lock the alloy hits the front roll bar. has non genuine alpina replicas 17 inch alloys. didnt do this with these wheels and standard roll bar. any suggestions?
Page 1 of 1
Re: H&R roll bar problem
Posted: Sun Jan 28, 2007 4:56 pm
mine did the same fella. i used to have 17" alpina replicas. ive put 15' bbss on now and it still touches but less. if you attach the rollbar with the other holes(on the softer or harder setting) it may be more out the way.-im gonna have a look and see if that'll work today. its pretty bad design to be honest.
Re: H&R roll bar problem
Posted: Sun Jan 28, 2007 5:19 pm
H&R stuff is over rated.
might help by fitting eccentric m3 bushes.
might help by fitting eccentric m3 bushes.
Re: H&R roll bar problem
Posted: Sun Jan 28, 2007 5:26 pm
i have eibachs on the tightest setting and they dont touch 
Re: H&R roll bar problem
Posted: Sun Jan 28, 2007 5:30 pm
i've heard extremely good reviews about these roll barsm-dtech wrote:H&R stuff is over rated..
Re: H&R roll bar problem
Posted: Sun Jan 28, 2007 6:53 pm
Theres nothing wrong with H&R bars
Andrew
Andrew
Re: H&R roll bar problem
Posted: Sun Jan 28, 2007 6:53 pm
its the wheels that are the problem.
Re: H&R roll bar problem
Posted: Sun Jan 28, 2007 8:40 pm
i agree...pnd wrote:its the wheels that are the problem.
Re: H&R roll bar problem
Posted: Sun Jan 28, 2007 8:52 pm
i have the standard wheels on mine and still have the above problem. i have some eccentric control arm bushes that will be going on soon so ill be able to see if they make a difference.
is your car lowered aswell mattcreak?
is your car lowered aswell mattcreak?