E30 Zone

OK just been round Duffs to help sort out the wash jet on his car and part number 15 on the pic below is mullered try compressed air etc to clear the block no joy, Is this a part the dealer will have on the shelf or do u think its order only??



Any other suggestions how to clear the blockage would be great as his MOT is due for thursday

Thanks

Neil

order only id say mate
like all e30 parts from stealers sadly

in't it just a "Y" splitter? when mine cracked i used one from a fish tank air line supply!!! 18p from the fish shop and it still doing the job!

And before you ask-

my sisters fish tank is next to the PC and i was just about to post on the zone when i saw it JOB done!!

appletree wrote:iwhen mine cracked i used one from a fish tank air line supply!!! 18p from the fish shop and it still doing the job!

Excellent idea.

Like the idea going to the fish shop tomorrow then, also i think halfrauds doa spliter type join good call

Daz tell me about it order only and a few days wait

I think they are non-return valves - so its best to get the right ones from the stealers. They ar ekept in stock at my local one and were only about a quid....

Im sure they are one way valves also

i thought they were one way valves hence the pressure release holes

cliffybabe wrote:i thought they were one way valves hence the pressure release holes

I know this is a different diagram but i always thought the non return valves were no 15 on this diagram.......




i cant understand why its not on the original diagram as ive never been under the bonnet of an e30 without these valves fitted to the washers, usually hanging under the bonnet where they've been removed for cleaning purposes before.....

HTH

BTW if you need the t shape bits m8 let me know ill post you a couple, i must have loads of these lying around!!

Tom

Tomson cheers fella I need this one for chris he's got a MOT first thing tomorrow got onto the dealer and i cant belive it they've got 1 on the shelf result im gonna grab for chris at lunch and go round and put it on tonight thanks for your help guys and Tomson thanks for the offer fella

No worries Neil, the T shape bits must be used in other models, thats why they are on the shelf!!!