E30 Zone

Hi does anyone know how to remove the front bumper on a 91 316i. is it bolted in place, if so how many and where are they, any tips would be greatly appricated. I had a front end shunt, and now the bumper (still in one piece) is pushed in one side, I'm hoping to be able to take it off and put it back on straight.

HI mate, there's two Torx T55 bolts holding the bumper on from the underneath. Just un do them and it slides off forwards, may need a bit of a tug if it's been bashed, but persever they are the only two bolts. And don't forget to disconnect the indicators once you have got it a couple of inches off.

Thanks for your help, I'll let you know how i get on