E30 Zone

Hi all,

I have these AVO Monotube "RACE" coilovers, the top mounts are all pillowball mounts, and the rear ones dont have studs in them, they take a nut and bolt instead. - I don't have the nuts and bolts...



Anyone able to tell me what nut/bolt spec I need for mounting these? Or (bit of a long shot) anyone able to ID the top mounts? They look different to most because they seem to have angled edges rather than rounded ones!

I could work it out for myself but they are in a box, in another bigger box, in the loft, behind a million other things, and I thought someone here might know before I ruin my life by going up there.

Oh and I know the front ones dont have top mounts in this pic, I have brand new GAZ billet ones for the front.

well i know the pillow ball rear top mounts i've got use an M8 stud that's pressed in.

most rear top mounts are M8.

Cheers, I'll start with M8 and see if that works.

no worries, as i said most rear top mounts use them.

i'd get both normal bolts & a couple of press in M8 studs & see which fits & works best.