Page 1 of 1

Fuse 10 again

Posted: Sat Feb 10, 2018 9:54 pm
by MiniC
ive had this issue for a while now and its been driving me crazy. ive been trying various methods to fix it for a few months now to no avail. fuse 10 on my car is blowing when i use the headlights, blowers or reverse lights with one of the others. ive traced all the wires back and checked the resistor and it all seems fine. i have sidelights and the blowers work a little when 10 is blown.

if i use the blowers while fuse 10 is dead then it seems to draw a lot of power as indicated with the dash parking light.

i have checked all of the wiring diagrams and can see no correlation with the 3 of them. does anyone have any ideas that i may have missed?

Re: Fuse 10 again

Posted: Sun Feb 11, 2018 11:02 am
by BenHar
Have you checked the wiring to the reversing light switch?

Ben

Re: Fuse 10 again

Posted: Sun Feb 11, 2018 12:41 pm
by MiniC
Yeah I have just incase I also chopped and repaired all of the crimp points and it's all working fine but as soon as I use other it blows it.