Page 1 of 1
Bmw e30 abs help
Posted: Sat Mar 18, 2017 7:16 pm
by ibzy
Just wanted to know can i retrofit a abs system in to my e30.
Re: Bmw e30 abs help
Posted: Sun Mar 19, 2017 10:52 am
by Brianmoooore
Yes, but there's a lot of work. All four hubs need to be the type that have the holes for the sensors, and the ABS rings on the bearings/drive shafts. Brackets need to be welded on for the ABS pump.
After that, the wiring is relatively simple. It's all self contained looms, apart from the supply from pin 20 of the C101 engine loom plug.
Re: Bmw e30 abs help
Posted: Sun Mar 19, 2017 3:29 pm
by ibzy
Brianmoooore wrote:Yes, but there's a lot of work. All four hubs need to be the type that have the holes for the sensors, and the ABS rings on the bearings/drive shafts. Brackets need to be welded on for the ABS pump.
After that, the wiring is relatively simple. It's all self contained looms, apart from the supply from pin 20 of the C101 engine loom plug.
Okay thanks