Page 1 of 1

Wiring! OBC/rev counter/interior lights not working FIXED

Posted: Sun Jun 14, 2015 4:49 pm
by mcspike
Hello

I have a 91 316i saloon M42'd

My OBC, tacho and interior lights (including bootlight, excluding glovebox) have not been working for a while.

The retrofitted OBC is receiving power (backlit) but nothing on the screen. This worked before.

Rev counter + econo meter do nothing.

Interior lights work under no circumstances. They rarely would come on extremely dim, but worked as they should, with doors etc. No delay timer fitted.

I have checked all the earths twice over, changed SI board for one from a working cluster, changed the whole cluster and changed fuses in the box.

I had some water coming into the passenger side footwell which was down to blocked sill drains. The carpet has been out for a while and these things became faulty during this time so this may be relevant.

I've had a good look through the Wiring Diagrams.
OBC
Instrument Cluster
Interior lights < click for links ^
Splice locations

SOLVED - the S319 splice located half way between the passenger side speaker and passenger seat was badly corroded, loads of green stuff inside.

Wires cut back, soldered and all working again.