Page 1 of 1
which rear link bar to use???
Posted: Sat May 09, 2015 6:52 pm
by urfy
Im going to change my rear anti roll bar but the new one has holes to bolt the link bars like the front ones, so cannot put the original ones.
what have people here used?
Thanks.
Re: which rear link bar to use???
Posted: Mon May 11, 2015 6:18 pm
by urfy
Bump.....
Re: which rear link bar to use???
Posted: Mon May 11, 2015 9:05 pm
by BHadley
Is this up rated stuff like eibach ?
Re: which rear link bar to use???
Posted: Mon May 11, 2015 9:10 pm
by urfy
They are h&r
Re: which rear link bar to use???
Posted: Mon May 11, 2015 9:48 pm
by BHadley
Like these?
http://www.dcperformance.co.uk/cheap/90 ... 577-1.html
As far as it reads standard stuff is good to use (the alloy drop link)
Did you have a roll bar to start with?
The bush shells do corrode.... All parts are avalible new
Re: which rear link bar to use???
Posted: Mon May 11, 2015 10:08 pm
by Topblag
Don't use the one from a 320 coupe.
Re: which rear link bar to use???
Posted: Tue May 12, 2015 8:59 pm
by urfy
i have the h&r rear anti roll bar......
Re: which rear link bar to use???
Posted: Tue May 12, 2015 11:30 pm
by reggid
maybe not much help but whiteline in oz and a few places in the US (IE, VAC, GC, TMS, AKG ) sell links that work with aftermaket bars front and rear. i would probably avoid ones that have rod ends without a protective boot for street use as they get dirt and grit and end in them and up being noisy after about 6-12 months.
Re: which rear link bar to use???
Posted: Wed May 13, 2015 12:33 pm
by urfy
reading that link it seems its for non oe links......
is there a way to fit oe links on to the h&r rear bar?