Page 1 of 1
Old to new headlights wiring, please help!
Posted: Mon Apr 13, 2015 2:19 pm
by JP1979
Hi all, just wanted to confirm the change on lights”¦ I'm changing from the 'bullseye lights to a post facelift headlight.. so my old ones have a connector with 3 prongs and 2 on the other light and the new ones have just 2 on each light”¦ Do i try and find a plug to fit the new ones with a bit of wire on them and then simply solder my 2 or my three wires (the two earth wires) together and simply make in to one? Any help would be very much appreciated! Thanks Justin
Re: Old to new headlights wiring, please help!
Posted: Mon Apr 13, 2015 10:13 pm
by JP1979
Sorry.. I'm changing from the 'early lights' rather than bullseye as originally stated.. Thanks
Re: Old to new headlights wiring, please help!
Posted: Mon Apr 13, 2015 10:57 pm
by clarko74
When I did this I got a set of sockets from the loom of a later car, chopped the sockets from my loom then soldered them on.
I had originally planned to make up a couple of mini looms to go between the earlier main loom and the newer lights but was unable to find all the plugs needed.
Re: Old to new headlights wiring, please help!
Posted: Tue Apr 14, 2015 10:47 am
by JP1979
perfect, thanks very much
