Page 1 of 1
Ball joint rubbers!
Posted: Sun Oct 13, 2013 3:32 pm
by jmec
Can you get new rubber seals for ball joints? The ball joint rubber on the control arm has a small nick in it but the joint itself is fine & I'd imagine changing that particular joint is a pain! Cheers J
Re: Ball joint rubbers!
Posted: Sun Oct 13, 2013 5:00 pm
by capnmchl
Yes, although I can't remember if you can actually change them on E30 wishbones. If it has a spiral spring clip at the base of the boot, then you can change it.
Re: Ball joint rubbers!
Posted: Sun Oct 13, 2013 5:43 pm
by Brianmoooore
They can be changed, and I've done so frequently. No scrap balljoint ever goes into the waste bin in my workshop wearing a still serviceable boot!
New covers used to be only available from the likes of kit car parts suppliers, but since a split one has become a MOT test failure, they are becoming more widely available from motor factors, etc.
Re: Ball joint rubbers!
Posted: Wed Oct 16, 2013 7:15 pm
by jmec
Thanks for info chaps......J
Re: Ball joint rubbers!
Posted: Wed Oct 16, 2013 9:00 pm
by jonesy318
just ordered a load from ebay, fingers crossed they'll be ok
Re: Ball joint rubbers!
Posted: Fri Oct 18, 2013 9:01 am
by paris
jonesy318 wrote:just ordered a load from ebay, fingers crossed they'll be ok
Can you share the link as mine are torn on both sides