E30 Zone

Hello,

I've got everything else from the battery in boot conversion installed, but can't do the final bit!

I can't find any holes to bolt the dummy terminal to the bulkhead in the engine bay.

Do I just have to hammer around with a screwdriver until they tap out from under the seam sealer?

Thanks in advance.

You should be able to see them from the drivers side scuttle panel plasticy thing lol.

M1k3 wrote:You should be able to see them from the drivers side scuttle panel plasticy thing lol.

still can't see them when I look down that plastic thing.

You need to take the plastic bit off, I've just been out and took a picture, give me a sec and ill upload it

It's not shown on that pic.
I'm sure the cutout is located on the inner wing where the battery sat.
It should be an oval shape near the firewall

Rav335uk wrote:It's not shown on that pic.
I'm sure the cutout is located on the inner wing where the battery sat.
It should be an oval shape near the firewall

Hes on about the ghost terminal mate. I think?

Cheers, what's the best way to remove the drivers side plastic cover. Do I have to remove the wiper arm as well? How do I do that?

Thanks

Didin't rear that

Yeah you do, a 13mm socket and a flathead screwdriver to remove the panel.

Thanks for the help dude! Got it. Glad it's all mint under there.

No worrys mate.