Page 1 of 1
MOT fail
Posted: Mon Aug 29, 2011 11:32 am
by unmol
hi guys, quick question if any 1 can help. my sport failed on two things for the MOT. just wanted someone to show me a pic of the following.
"front suspension component mounting prescribed area is corroded"
is this the droplink? if anyone can show me a pic of this.
or is the "front anti roll bar linkage" the drop link
Re: MOT fail
Posted: Mon Aug 29, 2011 11:55 am
by daimlerman
Front anti roll bar linkage will be the drop link.
Other is more difficult,my MoT man gets artistic with a yellow crayon on bits that he does not like!
May be an idea to ask him to show you exactly what he is worried about.
Re: MOT fail
Posted: Mon Aug 29, 2011 1:31 pm
by sag
there nothing wrong with ur drop link it is saying that the prescibe area is corroded ...basically uv have got rust within 30cm cicumfrance of a suspension compoment ...il suggest u query the mot tester and ask him were the corrosion is..... a long shot guess its either 1 of the turrets,scuttle,battery tray or the flitch panel !!
and what was the other thing wrong with it?(u said it failed on two things)
Re: MOT fail
Posted: Mon Aug 29, 2011 9:16 pm
by unmol
Cheers guys. the other problem was the steering rack, ive changed it for a second hand one but ran into a problem. the track rod end ball joint keeps spinning when i tighten the nut. iv'e tried jacking it but same problem. the old rack had alen key holes on the top but this ones got nothing. any ideas?
Re: MOT fail
Posted: Mon Aug 29, 2011 9:19 pm
by bigwinn
keep using the jack under the ball joint fella- not much else you can do