Page 1 of 1
320i AUTO WILL NOT GO INTO REVERSE!!!
Posted: Sun May 08, 2011 8:26 pm
by hmuminovic
Hi Guys,
todays i changed my fan belt n power steering belt and flushed the whole cooling system!
I then took it for a quick spin, everything was running fine!
Then all of a sudden as i tried to turn around, i put it into reverse and NOTHING!!!
it just revs but is milimted to the revs! even when i put it into park or netural, it only reves a certain amount!
it will drive forwards without any problem!
is this a common problem on the auto and what can be done to resolve this as im getting a bit worried about the cost!!!
the car is a 1988 'F' 320i auto 3door! with 155k on the clock!
Re: 320i AUTO WILL NOT GO INTO REVERSE!!!
Posted: Sun May 08, 2011 8:32 pm
by cecotto479
Carpet mat slipped and jammed under the throttle pedal?
Re: 320i AUTO WILL NOT GO INTO REVERSE!!!
Posted: Sun May 08, 2011 8:36 pm
by hmuminovic
nah there is no mats in the car!!! lol!!!
Re: 320i AUTO WILL NOT GO INTO REVERSE!!!
Posted: Sun May 08, 2011 8:39 pm
by cecotto479
Don't laugh. I've seen it happen.
If you operate the throttle from the throttle body as opposed to the pedal, does it rev?
Re: 320i AUTO WILL NOT GO INTO REVERSE!!!
Posted: Sun May 08, 2011 8:40 pm
by hmuminovic
yeah it revs, but is still limited!!
i have noticed though, that the other cable not the throttle one, but the other one which is i think the kickdown cable??? this has loosened alot!!!
could this explain this??
Re: 320i AUTO WILL NOT GO INTO REVERSE!!!
Posted: Sun May 08, 2011 8:48 pm
by cecotto479
Yes. Check the kickdown switch at the throttle pedal.
Re: 320i AUTO WILL NOT GO INTO REVERSE!!!
Posted: Sun May 08, 2011 8:49 pm
by hmuminovic
what do i need to look out for???
how should it be originally???
Re: 320i AUTO WILL NOT GO INTO REVERSE!!!
Posted: Sun May 08, 2011 9:32 pm
by cecotto479
Sounds like it might have come out of its bracket.
Re: 320i AUTO WILL NOT GO INTO REVERSE!!!
Posted: Sun May 08, 2011 9:42 pm
by hmuminovic
bracket??
u mean the gearbox mounts??
i would appreciate as many suggestiions as possible, as next weekend i will be jacking the car up on stands and having a propa look!!!
Re: 320i AUTO WILL NOT GO INTO REVERSE!!!
Posted: Sun May 08, 2011 10:02 pm
by cecotto479
No. The bracket that the kickdown switch attaches to. If you try go activate the kickdown at the pedal - without the engine running - does it feel right? Can you feel the switch operate? Take a look. I've seen the switch separate and come out of its location.
Re: 320i AUTO WILL NOT GO INTO REVERSE!!!
Posted: Sun May 08, 2011 10:20 pm
by hmuminovic
the switch itself, it feel right, however, i do not see any cables or wires to this, under the switch there is not wire or connector or nothing?