E30 Zone

I have been offered a set of OZ Supertourismo wheels of a Saxo VTS that has found an early grave as the engine died, the cars going to the scrappers and was used as a track car. The wheels are a little tatty but straight and best of all free if I want them.

Before anyone suggests taking them and selling them for a profit it is a good friend so cant do that.

He reckons there 4x100 but no idea of the ET does anyone know if they would fit an E30? Would I need spacers etc?

I do like the design and with a good refurb could be pretty nice.

Its french so the PCD will be 4x108!!

E30's are 4x100 mate so in short... No they won't fit! Shame cos they are nice rims man

Bugger, they are nice.

Do you know if you can get ant sort of adapters that would make them fit? I've seen a few to change to other fitments but I have never tried these.

You will be able to get adaptors but will depend on the offset of the OZ rims, adaptors start at 15mm thick (on ebay) so if they were ET40 with the 15mm adaptors it would bring it down to ET25 which would be spot on for the E30. If they were ET15 then the spacers would take it to ET0 which would mean the wheels would stick out and foul the arches.

HTH

Charlie

P.S it they are free get them anyway as worst case you give them a refurb and sell them on

http://cgi.ebay.co.uk/PDV-Custom-Wheel- ... 2c582b50b8

£130 for a set of 4

Thanks Charlie will need to see if I can find out the ET, can't sell them though as its a good mate and he wouldn't be too chuffed if I did that.

At £130 for spacers plus a refurb and tyres I would getting upto a fair whack of cash might just be better buying new wheels.

saxos are 4x100 used to av vts rims on my nova!