Page 1 of 1
foglight wiring (finished big thanks)
Posted: Thu Sep 15, 2005 6:15 pm
by e30-320i
i,m picking up a pair of front fogs soon and was wondering if anyone can tell me if the wiring is already in place on bmws that didn,t have them as standard.
Posted: Thu Sep 15, 2005 9:26 pm
by smithy318i
yes. tucked up in the headlight area.
you will need relay K8, 2x7.5A fuses and the double light switch.
Posted: Thu Sep 15, 2005 10:43 pm
by Brianmoooore
smithy318i wrote:yes. tucked up in the headlight area.
you will need relay K8, 2x7.5A fuses and the double light switch.
And the little bulb and its holder fot the instrument panel.
Posted: Fri Sep 16, 2005 7:50 pm
by e30-320i
i was hoping that would be the case
nice simple job and i should be able to get the fuses and the switch from the car when i get the lights
thanks alot
Posted: Fri Sep 16, 2005 7:53 pm
by e30-320i
And the little bulb and its holder fot the instrument panel.[/quote]
maybe a stupid question but how do i fit this mate..
Posted: Fri Sep 16, 2005 8:09 pm
by smithy318i
e30-320i wrote:And the little bulb and its holder fot the instrument panel.
maybe a stupid question but how do i fit this mate..
[/quote]
yes it's a silly question!
rope a small child into fitting the bulb to the back of the cluster with the promiss of a bar of chocolate
(Small hands required).
or remove the cluster from the dash (13 screws in total)
Posted: Fri Sep 16, 2005 8:49 pm
by e30-320i
thanks mate what chocolate works best
Posted: Fri Sep 16, 2005 9:30 pm
by Handy
Thanks for the info. I've got the lights and the switch for mine,just need a relay and fuses now
Posted: Sun Sep 18, 2005 10:54 am
by e30-320i
fitted my fogs yesterday all working fine and i only cut myself once
i justed wanted to say thankyou for the advice to everyone that replied
thank god for the zone
Posted: Sun Sep 18, 2005 11:24 am
by e30-320i
as promised a few pics for muleskinner.
the small white clips are what the foglights screw into i had to remove the front bumper to get these off the donor car you have to get these from the front with a pair of pliers and turn 90 deg then just push them through.it would be alot easier to buy some from bmw but i didnt know i needed them until i started.
the relay that sits here the two 7.5a fuses must have already been in place as i didn't need them
the double switch just pull out the old one and swap
all the wiring was wrapped up behind the headlights as suggested
all done and withonly one very minor injury
hope this helps mate. thanks again to everyone that helped me